A Novel Method for Achieving Gradient Microstructure in a Cu-Al Alloy: Surface Spinning Strengthening (3S)
文献类型:期刊论文
作者 | Ren, Chuan-Xi ; Wang, Qiang ; Zhang, Zhen-Jun ; Zhu, Yan-Kun ; Zhang, Zhe-Feng |
刊名 | ACTA METALLURGICA SINICA-ENGLISH LETTERS |
出版日期 | 2017-03-01 |
卷号 | 30期号:3页码:212-217 |
ISSN号 | 1006-7191 |
关键词 | Cu-Al alloy Surface spinning strengthening (3S) Strength Microhardness Gradient microstructure |
通讯作者 | Wang, Q ; Zhang, ZF (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China. ; Zhang, ZF (reprint author), Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Peoples R China. |
中文摘要 | A new designed surface strengthening method, surface spinning strengthening (3S), was applied to achieve gradient microstructure in the surface layer of a Cu-11 at.% Al alloy. According to the level of grain refinement, the gradient microstructure can be divided into four zones, including nanoscale grain zone, ultra-fine grain zone, fine grain zone and coarse grain zone from the surface to the matrix. Meanwhile, a plenty of grain boundaries and twin boundaries were introduced to inhibit the dislocation motion in the surface layer during the plastic deformation process. Consequently, the hardened layer with a microhardness gradient and high residual compressive stress was produced on the samples, and the yield strength of the Cu-11 at.% Al alloy was effectively improved after 3S processing due to the strengthening effect caused by the gradient microstructure. |
学科主题 | Metallurgy & Metallurgical Engineering |
资助信息 | National Natural Science Foundation of China (NSFC) [51331007, 51501198] |
收录类别 | SCI |
语种 | 英语 |
公开日期 | 2017-08-17 |
源URL | [http://ir.imr.ac.cn/handle/321006/78253] |
专题 | 金属研究所_中国科学院金属研究所 |
推荐引用方式 GB/T 7714 | Ren, Chuan-Xi,Wang, Qiang,Zhang, Zhen-Jun,et al. A Novel Method for Achieving Gradient Microstructure in a Cu-Al Alloy: Surface Spinning Strengthening (3S)[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2017,30(3):212-217. |
APA | Ren, Chuan-Xi,Wang, Qiang,Zhang, Zhen-Jun,Zhu, Yan-Kun,&Zhang, Zhe-Feng.(2017).A Novel Method for Achieving Gradient Microstructure in a Cu-Al Alloy: Surface Spinning Strengthening (3S).ACTA METALLURGICA SINICA-ENGLISH LETTERS,30(3),212-217. |
MLA | Ren, Chuan-Xi,et al."A Novel Method for Achieving Gradient Microstructure in a Cu-Al Alloy: Surface Spinning Strengthening (3S)".ACTA METALLURGICA SINICA-ENGLISH LETTERS 30.3(2017):212-217. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。