Multi-Gating Injection Molding to Enhance the Thermal Conductivity of Carbon Fiber/Polysulfone Composite
文献类型：期刊论文
| 作者 | Sun, Deliang ; Lin, Guoming ; Sui, Guoxin ; Hao, Yulin ; Yang, Rui ; Zhang, Kai |
| 刊名 | POLYMER COMPOSITES
 |
| 出版日期 | 2017 |
| 卷号 | 38期号:1页码:185-191 |
| ISSN号 | 0272-8397 |
| 通讯作者 | Sui, GX (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China. |
| 中文摘要 | Carbon fiber was blended into the polysulfone matrix by twin screw extruder. The polymer composites samples were prepared using four different processing technologies, the compression molding, edge-gating injection molding, sprue-gating injection molding, and the multi-gating injection molding techniques. Among four techniques, the composite samples manufactured by multi-gating injection molding technique got a higher value of thermal conductivity, which is due to the carbon fibers orientation and distribution. The experimental result indicated that the fiber orientation have a significant influence on the thermal conductivity of polymer composites. The thermal conductivity of sample made by multi-gating injection molding was 1.82 W/(m.K)when the fiber content was 26 vol%, which was nearly twice than the values obtained by conventional technologies. (C) 2015 Society of Plastics Engineers |
| 学科主题 | Materials Science, Composites ; Polymer Science |
| 收录类别 | SCI |
| 资助信息 | China Academy of Engineering Physics [11176034]; National Natural Science Foundation of China |
| 语种 | 英语 |
| 公开日期 | 2017-08-17 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/78367]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Sun, Deliang,Lin, Guoming,Sui, Guoxin,et al. Multi-Gating Injection Molding to Enhance the Thermal Conductivity of Carbon Fiber/Polysulfone Composite[J]. POLYMER COMPOSITES,2017,38(1):185-191. |
| APA | Sun, Deliang,Lin, Guoming,Sui, Guoxin,Hao, Yulin,Yang, Rui,&Zhang, Kai.(2017).Multi-Gating Injection Molding to Enhance the Thermal Conductivity of Carbon Fiber/Polysulfone Composite.POLYMER COMPOSITES,38(1),185-191. |
| MLA | Sun, Deliang,et al."Multi-Gating Injection Molding to Enhance the Thermal Conductivity of Carbon Fiber/Polysulfone Composite".POLYMER COMPOSITES 38.1(2017):185-191. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。