Review of micro/nano machining by utilizing elliptical vibration cutting
文献类型：期刊论文
| 作者 | Zhang, J. G.; T. Cui; C. Ge; Y. X. Sui and H. J. Yang |
| 刊名 | International Journal of Machine Tools & Manufacture
 |
| 出版日期 | 2016 |
| 卷号 | 106 |
| 英文摘要 | A time-delayed integration charge-coupled device (TDI CCD) in an aerial panoramic camera compensates the sweep image motion correctly on the premise that the TDI charge shifting direction is coincident with that of the sweep image motion. The coordinate transformation method is used to find out how the included angle between the two directions originated. Then the precise alignment method of the TDI charge shifting direction is proposed to eliminate the included angle. TDI CCD is operated in area mode, nodding the scan mirror, the trajectory of the image point is derived to be a hyperbola, which could be equivalent to an obliquely straight line. The tilt angle of the line is exactly the included angle between the two directions. Meanwhile, the tilt angle can be calculated by the least square method. Then the scan head or the focal plane assembly is precisely rotated to eliminate the included angle between the two directions. The assembling error after precise alignment is calculated at - 16.4 s, which could hardly influence the MTF of TDI CCD. The panoramic imaging experiment and the flight test show that the precise alignment method is feasible and completely satisfies the operating requirement of the aerial panoramic camera. (C) 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) |
| 收录类别 | SCI ; EI |
| 语种 | 英语 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/57417]  |
| 专题 | 长春光学精密机械与物理研究所_中科院长春光机所知识产出 |
| 推荐引用方式 GB/T 7714 | Zhang, J. G.,T. Cui,C. Ge,et al. Review of micro/nano machining by utilizing elliptical vibration cutting[J]. International Journal of Machine Tools & Manufacture,2016,106. |
| APA | Zhang, J. G.,T. Cui,C. Ge,&Y. X. Sui and H. J. Yang.(2016).Review of micro/nano machining by utilizing elliptical vibration cutting.International Journal of Machine Tools & Manufacture,106. |
| MLA | Zhang, J. G.,et al."Review of micro/nano machining by utilizing elliptical vibration cutting".International Journal of Machine Tools & Manufacture 106(2016). |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。