Fabrication, microstructure and mechanical properties of novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering
文献类型:期刊论文
作者 | Qiao ZH ; Ma XF ; Zhao W ; Tang HG ; Cai SG ; Zhao B |
刊名 | materials science and engineering a-structural materials properties microstructure and processing
![]() |
出版日期 | 2007 |
卷号 | 460页码:46-49 |
关键词 | AL-W ALLOYS BEHAVIOR HARDMETALS |
ISSN号 | 0921-5093 |
通讯作者 | ma xf |
中文摘要 | a novel cemented carbides alloy (w0.4al0.6)c-0.65-co were prepared by mechanical alloying and hot-pressing sintering in this work. hot-pressing (hp) as a common technique was performed to fabricate the bulk bodies of the hard alloys. the hardness, bending strength, density of the novel hard alloy are also tested, and it has superior mechanical properties. the hardness of (w0.4al0.6)c-0.65-co hard alloy was very high, and the density, operate cost of the novel material were much lower than wc-co, more important is the aluminum dissolving is not decrease the strength compared with the wc-co system. there is almost no eta-phase in the (w0.4al0.6)c-0.65-co cemented carbides system even the carbon deficient reaches the astonishing value of 35%. this novel property will give us more choice to design and gain new materials that we needed. |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000246726200007 |
公开日期 | 2010-07-13 |
源URL | [http://ir.ciac.jl.cn/handle/322003/14555] ![]() |
专题 | 长春应用化学研究所_长春应用化学研究所知识产出_期刊论文 |
推荐引用方式 GB/T 7714 | Qiao ZH,Ma XF,Zhao W,et al. Fabrication, microstructure and mechanical properties of novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering[J]. materials science and engineering a-structural materials properties microstructure and processing,2007,460:46-49. |
APA | Qiao ZH,Ma XF,Zhao W,Tang HG,Cai SG,&Zhao B.(2007).Fabrication, microstructure and mechanical properties of novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering.materials science and engineering a-structural materials properties microstructure and processing,460,46-49. |
MLA | Qiao ZH,et al."Fabrication, microstructure and mechanical properties of novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering".materials science and engineering a-structural materials properties microstructure and processing 460(2007):46-49. |
入库方式: OAI收割
来源:长春应用化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。