Preparation and mechanical properties of a bulk icosahedral quasicrystalline Ti45Zr35Ni17Cu3 alloy
文献类型：期刊论文
| 作者 | Liu BZ ; Wu YM ; Wang LM |
| 刊名 | journal of non-crystalline solids
 |
| 出版日期 | 2006 |
| 卷号 | 352期号:36-37页码:3936-3941 |
| 关键词 | NI-CU ALLOYS PHASES MICROHARDNESS |
| ISSN号 | 0022-3093 |
| 通讯作者 | wang lm |
| 中文摘要 | a bulk ti45zr35ni17cu3 alloy, which consisted of the icosahedral quasicrystalline phase, was prepared by mechanical alloying(ma) and subsequent pulse discharge sintering. ti45zr35ni17cu3 amorphous powders (with particle size < 50 mu m) were obtained after mechanical alloying for more than 150 h from the mixture of the elemental powder. the transformation temperature range from amorphous phase to the quasicrystalline phase was from 400 k to 900 k. the mechanical properties of the bulk quasicrystalline alloy have been examined at room temperature. the vickers hardness and compressive fracture strength were 620 +/- 40 and 1030 +/- 60 mpa, respectively. the bulk quasicrystalline alloy exhibited the elastic deformation by the compressive test. the fracture mode was brittle cleavage fracture. |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000241098800027 |
| 公开日期 | 2010-08-17 |
| 源URL | [http://ir.ciac.jl.cn/handle/322003/16613]  |
| 专题 | 长春应用化学研究所_长春应用化学研究所知识产出_期刊论文 |
| 推荐引用方式 GB/T 7714 | Liu BZ,Wu YM,Wang LM. Preparation and mechanical properties of a bulk icosahedral quasicrystalline Ti45Zr35Ni17Cu3 alloy[J]. journal of non-crystalline solids,2006,352(36-37):3936-3941. |
| APA | Liu BZ,Wu YM,&Wang LM.(2006).Preparation and mechanical properties of a bulk icosahedral quasicrystalline Ti45Zr35Ni17Cu3 alloy.journal of non-crystalline solids,352(36-37),3936-3941. |
| MLA | Liu BZ,et al."Preparation and mechanical properties of a bulk icosahedral quasicrystalline Ti45Zr35Ni17Cu3 alloy".journal of non-crystalline solids 352.36-37(2006):3936-3941. |
入库方式： OAI收割
来源：长春应用化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。