Influence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different composition
文献类型：期刊论文
| 作者 | Tan ZY ; Xu XF ; Sun SL ; Zhou C ; Ao YH ; Zhang HX ; Han Y |
| 刊名 | polymer engineering and science
 |
| 出版日期 | 2006 |
| 卷号 | 46期号:10页码:1476-1484 |
| 关键词 | ACRYLONITRILE-BUTADIENE-STYRENE POLYMER BLENDS PHASE MORPHOLOGY POLYCARBONATE/ABS BLENDS BEHAVIOR SAN POLY(STYRENE-CO-ACRYLONITRILE) COPOLYMERS PC MISCIBILITY |
| ISSN号 | 0032-3888 |
| 通讯作者 | zhang hx |
| 中文摘要 | a series of acrylonitrile-butadiene-styrene (abs) with different rubber content were prepared by diluting abs grafting copolymer containing 60% rubber with a styrene-acrylonitrile copolymer. abs prepared were blended with bisphenol-a-polycarbonate (pc) at the ratio of 70/30, 50/50, and 30/70 to prepare pc/abs blends. influence of rubber content in abs on the properties of abs and pc/abs blends were investigated. pc/abs blends with different compositions got good toughness when the rubber in abs increased to the level that abs itself got good toughness. the tensile properties and processability of pc/abs blends decreased with the increase of the total rubber content introduced into the blends. abs with the rubber content of 30 wt% is most suitable to be used to prepare pc/abs blends. the rubber content in abs affected the viscosity of abs, and subsequently the viscosity ratio of pc to abs. as a result, the morphology of pc/abs blends varied. the increase of rubber content in abs results in finer structure of pc/abs blends. |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000240749300019 |
| 公开日期 | 2010-08-17 |
| 源URL | [http://ir.ciac.jl.cn/handle/322003/16685]  |
| 专题 | 长春应用化学研究所_长春应用化学研究所知识产出_期刊论文 |
| 推荐引用方式 GB/T 7714 | Tan ZY,Xu XF,Sun SL,et al. Influence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different composition[J]. polymer engineering and science,2006,46(10):1476-1484. |
| APA | Tan ZY.,Xu XF.,Sun SL.,Zhou C.,Ao YH.,...&Han Y.(2006).Influence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different composition.polymer engineering and science,46(10),1476-1484. |
| MLA | Tan ZY,et al."Influence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different composition".polymer engineering and science 46.10(2006):1476-1484. |
入库方式： OAI收割
来源：长春应用化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。