Nanostructure and mechanical measurement of highly oriented lamellae of melt-drawn HDPE by scanning probe microscopy
文献类型：期刊论文
| 作者 | Du BY ; Zhang J ; Zhang QL ; Yang DC ; He TB ; Tsui OKC |
| 刊名 | macromolecules
 |
| 出版日期 | 2000 |
| 卷号 | 33期号:20页码:7521-7528 |
| 关键词 | ATOMIC-FORCE MICROSCOPE MOLECULAR-WEIGHT THIN-FILM NANOINDENTATION POLYETHYLENE INDENTATION LOAD |
| ISSN号 | 0024-9297 |
| 通讯作者 | he tb |
| 中文摘要 | scanning probe microscopy was used to simultaneously determine the molecular chain structure and intrinsic mechanical properties, including anisotropic elastic modulus and friction, for lamellae of highly oriented high-density polyethylene (hdpe) obtained by the melt-drawn method. the molecular-scale image of the highly oriented lamellae by friction force microscopy (ffm) clearly shows that the molecular chains are aligned parallel to the drawing direction, and the periodicities along and perpendicular to the drawing direction are 0.26 and 0.50 nm, respectively. the results indicate that the exposed planes of the lamellae resulting from the melt-drawn method are (200), which is consistent with results of transmission electron microscopy and electron diffraction. because of the high degree of anisotropy in the sample, coming from alignment of the molecular chains along the drawing direction, the measured friction force, f, determined by ffm is strongly dependent on the angle, theta, between the scanning direction and the chain axis. the force increases as theta is increased from 0 degrees (i.e., parallel to the chain axis) to 90 degrees (i.e., perpendicular to the chain axis). the structural anisotropy was also found to strongly influence the measurements of the transverse chain modulus of the polymer by the nanoindentation technique. the measured value of 13.8 gpa with transverse modulus was larger than the value 4.3 gpa determined by wide-angle x-ray diffraction, which we attributed to anisotropic deformation of the lamellae during nanoindentation measurements that was not accounted for by the elastic treatment we adopted from oliver and pharr. the present approach using scanning probe microscopy has the advantage that direct correlations between the nanostructure, nanotribology, and nanomechanical properties of oriented samples can be determined simultaneously and simply. |
| 收录类别 | SCI收录期刊论文 |
| 语种 | 英语 |
| WOS记录号 | WOS:000089735800040 |
| 公开日期 | 2010-11-04 |
| 源URL | [http://202.98.16.49/handle/322003/19529]  |
| 专题 | 长春应用化学研究所_长春应用化学研究所知识产出_期刊论文 |
| 推荐引用方式 GB/T 7714 | Du BY,Zhang J,Zhang QL,et al. Nanostructure and mechanical measurement of highly oriented lamellae of melt-drawn HDPE by scanning probe microscopy[J]. macromolecules,2000,33(20):7521-7528. |
| APA | Du BY,Zhang J,Zhang QL,Yang DC,He TB,&Tsui OKC.(2000).Nanostructure and mechanical measurement of highly oriented lamellae of melt-drawn HDPE by scanning probe microscopy.macromolecules,33(20),7521-7528. |
| MLA | Du BY,et al."Nanostructure and mechanical measurement of highly oriented lamellae of melt-drawn HDPE by scanning probe microscopy".macromolecules 33.20(2000):7521-7528. |
入库方式： OAI收割
来源：长春应用化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。