Microstructure and Tribological Properties of Laser Clad gamma/Cr7C3/Tic Composite Coatings on gamma-TiA1 Intermetallic Alloy
文献类型:期刊论文
作者 | Liu XB(刘秀波); Wang HM |
刊名 | Wear |
出版日期 | 2007 |
卷号 | 262期号:5-6页码:514-521 |
通讯作者邮箱 | liuxiubo@imech.ac.cn |
ISSN号 | 0043-1648 |
通讯作者 | Liu, XB (reprint author), Chinese Acad Sci, Inst Mech, Lab Laser Intelligent Mfg, 15 Beisihuanxi Rd, Beijing 100080, Peoples R China. |
中文摘要 | In order to improve the wear resistance of the gamma-TiAl intermetallic alloy, microstructure, room- and high-temperature (600 degrees C) wear behaviors of laser clad gamma/Cr7C3/TiC composite coatings with different constitution of NiCr-Cr3C2 precursor-mixed powders have been investigated by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive spectrometer (EDS), block-on-ring (room-temperature) and pin-on-disk (high-temperature) wear tests. The responding wear mechanisms are discussed in detail. Results show that microstructures of the laser clad composite coatings have non-equilibrium solidified microstructures consisting of primary hard Cr7C3 and TiC carbides and the inter-primary gamma/Cr7C3 eutectic matrix, about three to five times higher average microhardness compared with the TiAl alloy substrate. Higher wear resistance than the original TiAl alloy is achieved in the clad composite coatings under dry sliding wear conditions, which is closely related to the formation of non-equilibrium solidified reinforced Cr7C3 and TiC carbides and the positive contribution of the relatively ductile and tough gamma/Cr7C3 eutectics matrix and their stability under high-temperature exposure. |
学科主题 | 力学 |
类目[WOS] | Engineering, Mechanical ; Materials Science, Multidisciplinary |
研究领域[WOS] | Engineering ; Materials Science |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000244411000003 |
公开日期 | 2007-06-15 |
源URL | [http://dspace.imech.ac.cn/handle/311007/16932] |
专题 | 力学研究所_力学所知识产出(1956-2008) |
推荐引用方式 GB/T 7714 | Liu XB,Wang HM. Microstructure and Tribological Properties of Laser Clad gamma/Cr7C3/Tic Composite Coatings on gamma-TiA1 Intermetallic Alloy[J]. Wear,2007,262(5-6):514-521. |
APA | 刘秀波,&Wang HM.(2007).Microstructure and Tribological Properties of Laser Clad gamma/Cr7C3/Tic Composite Coatings on gamma-TiA1 Intermetallic Alloy.Wear,262(5-6),514-521. |
MLA | 刘秀波,et al."Microstructure and Tribological Properties of Laser Clad gamma/Cr7C3/Tic Composite Coatings on gamma-TiA1 Intermetallic Alloy".Wear 262.5-6(2007):514-521. |
入库方式: OAI收割
来源:力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。