Strain rate sensitivity of sintered silver nanoparticles using rate-jump indentation
文献类型：期刊论文
| 作者 | Long X ; Tang WB; Feng YH(冯义辉); Chang C; Keer LM; Yao Y
|
| 刊名 | INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
 |
| 出版日期 | 2018-05-01 |
| 卷号 | 140页码:60-67 |
| 关键词 | Silver Nanoparticles Strain Rate Sensitivity Nanoindentation Strain Rate Sensitivity Creep Strain Rate Stress Exponent |
| ISSN号 | 0020-7403 |
| DOI | 10.1016/j.ijmecsci.2018.02.035 |
| 文献子类 | Article |
| 英文摘要 | Nanoindentation experiments were performed at room temperature on pressure-less sintered silver nanoparticles (AgNP) samples. Two representative die attach solder materials: sintered electrically conductive silver adhesive and conventional Sn-3.0Ag center dot 0.5Cu solder were investigated. A novel technique of multiple strain-rate jumps is adopted accompanied by the continuous stiffness measurement, which can effectively determine the strain rate sensitivity (SRS) with good accuracy. Different strain rates and indentation depths are considered to obtain the nanomechanical properties such as hardness and Young's modulus. Compared with Young's modulus of sintered AgNP, the effect of applied strain rate is more influential to the hardness. In the loading stage, the SRS exponent decreases due to a smaller variation of hardness at a greater indentation depth. In the holding stage prior to the unloading of the applied indentation force, the creep displacement is relatively insensitive to the applied strain rate, however, the creep strain rate decays exponentially and the corresponding stress exponents are determined. (C) 2018 Elsevier Ltd. All rights reserved. |
| 分类号 | 一类 |
| WOS关键词 | MECHANICAL-PROPERTIES ; NANOINDENTATION ; TEMPERATURE ; CREEP ; EVOLUTION ; TESTS ; SN |
| WOS研究方向 | Engineering ; Mechanics |
| 语种 | 英语 |
| WOS记录号 | WOS:000432765300006 |
| 资助机构 | National Natural Science Foundation of China(51508464 ; Natural Science Foundation of Shaanxi Province(2017JM1013) ; Fundamental Research Funds for the Central Universities(3102016ZY017) ; Astronautics Supporting Technology Foundation of China(2017-HT-XG) ; 11772257) |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/77498]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 推荐引用方式 GB/T 7714 | Long X,Tang WB,Feng YH,et al. Strain rate sensitivity of sintered silver nanoparticles using rate-jump indentation[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2018,140:60-67. |
| APA | Long X,Tang WB,冯义辉,Chang C,Keer LM,&Yao Y.(2018).Strain rate sensitivity of sintered silver nanoparticles using rate-jump indentation.INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,140,60-67. |
| MLA | Long X,et al."Strain rate sensitivity of sintered silver nanoparticles using rate-jump indentation".INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 140(2018):60-67. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。