Approaching ITER PF Coil Manufacturing
文献类型：期刊论文
| 作者 | Lim, B. S.1; Simon, F.1; Ilyin, Y.1; Hua, Q.1; Beemsterboer, C.1; Mitchell, N.1; Valente, P.2; Smith, K.2; Sabadi, N. P.2; Oustinov, A.3 |
| 刊名 | IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
 |
| 出版日期 | 2016-06-01 |
| 卷号 | 26期号:4页码:4205204 |
| 关键词 | Fusion Iter Pf Coil Superconductor |
| DOI | 10.1109/TASC.2015.2512705 |
| 文献子类 | Article |
| 英文摘要 | The ITER poloidal field (PF) coil system provides a magnetic field for plasma shaping and position control together with the central solenoid coils; it needs to operate in a fast pulse mode, leading to induced voltages of up to 14 kV on the coil terminals during operation. The PF magnet system consists of six coils. The cable-in-conduit conductors with niobium-titanium (NbTi) superconducting material are used in the coils. All coils are fabricated by stacking six to nine double pancakes wound by two-in-hand winding scheme. The six PF coils (PF1 to PF6) are attached to the toroidal field coil cases through the flexible plates or sliding supports to allow small radial and vertical displacements. The PF coils will be procured by the European and Russian domestic agencies under separate procurement arrangements. To accelerate the PF6 coil schedule, which is one of the critical paths for the ITER schedule, a cooperation agreement has been placed between F4E and ASIPP in China in October 2013 with the CN-DA support. Before starting the manufacturing of the coil, the component qualification has been started, such as the 3 x 3 conductor mock-up, turn insulation, and helium inlet with the dummy conductors. Corresponding mechanical and electric tests were carried out at room temperature and 77 K. The PF dummy double pancake is also wound to demonstrate the winding. This paper presents the updated design for manufacturing of components. Their fabrication methods are also described. This paper concludes with a summary state report on PF1 dummy winding. |
| WOS研究方向 | Engineering ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:000377457900001 |
| 资助机构 | ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization ; ITER International Organization |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/21678]  |
| 专题 | 合肥物质科学研究院_中科院等离子体物理研究所 |
| 作者单位 | 1.ITER Org, F-13067 St Paul Les Durance, France 2.Fus Energy, ITER Dept, Magnet Grp, Barcelona 08019, Spain 3.Russian Domest Agcy, Moscow 123182, Russia 4.ASG Supercond, I-16152 Genoa, Italy 5.DV Efremov Sci Res Inst Electrophys Apparat NIIEF, St Petersburg 196641, Russia 6.Chinese Acad Sci ASIPP, Inst Plasma Phys, Hefei 230031, Peoples R China 7.Natl Fus Res Ctr Daejeon, Daejeon 169148, South Korea |
| 推荐引用方式 GB/T 7714 | Lim, B. S.,Simon, F.,Ilyin, Y.,et al. Approaching ITER PF Coil Manufacturing[J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,2016,26(4):4205204. |
| APA | Lim, B. S..,Simon, F..,Ilyin, Y..,Hua, Q..,Beemsterboer, C..,...&Chu, Y..(2016).Approaching ITER PF Coil Manufacturing.IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,26(4),4205204. |
| MLA | Lim, B. S.,et al."Approaching ITER PF Coil Manufacturing".IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY 26.4(2016):4205204. |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。