Qualification of the Manufacturing Procedures of the ITER Correction Coils
文献类型：期刊论文
| 作者 | Libeyre, P.1; Cormany, C.1; Dolgetta, N.1; Gaxiola, E.1; Ilyin, Y.1; Mitchell, N.1; Simon, F.1; Evans, D.1; Sgobba, S.2; Langeslag, S. A. E.2 |
| 刊名 | IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
 |
| 出版日期 | 2017-06-01 |
| 卷号 | 27期号:4页码:4201405 |
| 关键词 | Iter Manufacturing Procedures Qualification Superconducting Coils |
| DOI | 10.1109/TASC.2016.2630728 |
| 文献子类 | Article |
| 英文摘要 | The system of correction coils (CC) is a component of the ITER magnet system, required to correct toroidal asymmetries and reduce error magnetic fields detrimental for physical processes in the plasma. It includes 18 coils, inserted in between toroidal field coils and poloidal field coils and split into 3 sets of 6 coils each: bottom correction coils (BCC), side correction coils (SCC), and top correction coils (TCC). BCC and TCC are planar coils, whereas SCC are wound on a cylinder. All CC coils are wound using a 10 kA NbTi cable-in-conduit conductor and are manufactured by ASIPP laboratory (Institute of Plasma Physics, Chinese Academy of Sciences), under the responsibility of ITER China. A manufacturing line was installed in 2013 at ASIPP in a dedicated workshop for the construction of the CC. In order to qualify the manufacturing procedures, a comprehensive qualification program has been set up. This program includes a set of mock-ups, manufactured according to the process to be used for the coils and submitted to different tests. These qualification items are winding, insulation and vacuum pressure impregnation, helium inlet/outlet, terminal joints, case material, filler material between winding-pack and case, case assembly, and terminal service box. Qualification of conductor winding, He inlet/outlet manufacture, winding-pack turn and ground insulation installation and impregnation, case material, winding-pack-case filler material is achieved. This included mechanical testing of materials at room and cryogenic temperature in specialized testing laboratories and high-voltage tests performed at the CC workshop. Joint qualification, relying on electrical tests of joints in a dedicated test facility, is nearly complete. Remaining qualification items are case assembly, winding-pack insertion into case, and case closure welding. Manufacture of the first coil started in 2015 and its winding-pack is near completion. |
| WOS研究方向 | Engineering ; Physics |
| 语种 | 英语 |
| WOS记录号 | WOS:000397751000001 |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/31797]  |
| 专题 | 合肥物质科学研究院_中科院等离子体物理研究所 |
| 作者单位 | 1.ITER Org, CS 90046, F-13067 St Paul Les Durance, France 2.CERN, CH-1211 Geneva 23, Switzerland 3.China Int Nucl Fus Energy Program Execut Ctr, Beijing 100862, Peoples R China 4.Chinese Acad Sci, Inst Plasma Phys, Hefei 230031, Peoples R China |
| 推荐引用方式 GB/T 7714 | Libeyre, P.,Cormany, C.,Dolgetta, N.,et al. Qualification of the Manufacturing Procedures of the ITER Correction Coils[J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,2017,27(4):4201405. |
| APA | Libeyre, P..,Cormany, C..,Dolgetta, N..,Gaxiola, E..,Ilyin, Y..,...&Zheng, W..(2017).Qualification of the Manufacturing Procedures of the ITER Correction Coils.IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,27(4),4201405. |
| MLA | Libeyre, P.,et al."Qualification of the Manufacturing Procedures of the ITER Correction Coils".IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY 27.4(2017):4201405. |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。