Strain Rate Effect on Tensile Behavior for a High Specific Strength Steel: From Quasi-Static to Intermediate Strain Rates
文献类型：期刊论文
| 作者 | Wang W(王雯) ; Ma Y(马彦); Yang MX(杨沐鑫); Jiang P(姜萍); Yuan FP(袁福平); Wu XL(武晓雷)
|
| 刊名 | METALS
 |
| 出版日期 | 2018 |
| 卷号 | 8期号:1页码:11 |
| 关键词 | high specific strength steel strain rate effect intermediate strain rates strain partitioning deformation twins |
| ISSN号 | 2075-4701 |
| DOI | 10.3390/met8010011 |
| 英文摘要 | The strain rate effect on the tensile behaviors of a high specific strength steel (HSSS) with dual-phase microstructure has been investigated. The yield strength, the ultimate strength and the tensile toughness were all observed to increase with increasing strain rates at the range of 0.0006 to 56/s, rendering this HSSS as an excellent candidate for an energy absorber in the automobile industry, since vehicle crushing often happens at intermediate strain rates. Back stress hardening has been found to play an important role for this HSSS due to load transfer and strain partitioning between two phases, and a higher strain rate could cause even higher strain partitioning in the softer austenite grains, delaying the deformation instability. Deformation twins are observed in the austenite grains at all strain rates to facilitate the uniform tensile deformation. The B2 phase (FeAl intermetallic compound) is less deformable at higher strain rates, resulting in easier brittle fracture in B2 particles, smaller dimple size and a higher density of phase interfaces in final fracture surfaces. Thus, more energy need be consumed during the final fracture for the experiments conducted at higher strain rates, resulting in better tensile toughness. |
| 分类号 | 二类 |
| URL标识 | 查看原文 |
| WOS关键词 | DUAL-PHASE STEELS ; MECHANICAL-BEHAVIOR ; WIDE-RANGE ; TWIP STEEL ; TRIP/TWIP STEELS ; RATE SENSITIVITY ; GRAINED FE ; AL CONTENT ; DEFORMATION ; TRIP |
| WOS研究方向 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000427529100011 |
| 资助机构 | National Key R&D Program of China [2017YFA0204402] ; NSFC [11672313, 11472286, 11572328, 51701228, 51601204] ; Chinese Academy of Sciences [XDB22040503] |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/77887]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 作者单位 | 1.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, 15,North 4th Ring,West Rd, Beijing 100190, Peoples R China 2.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100190, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang W,Ma Y,Yang MX,et al. Strain Rate Effect on Tensile Behavior for a High Specific Strength Steel: From Quasi-Static to Intermediate Strain Rates[J]. METALS,2018,8(1):11. |
| APA | 王雯,马彦,杨沐鑫,姜萍,袁福平,&武晓雷.(2018).Strain Rate Effect on Tensile Behavior for a High Specific Strength Steel: From Quasi-Static to Intermediate Strain Rates.METALS,8(1),11. |
| MLA | 王雯,et al."Strain Rate Effect on Tensile Behavior for a High Specific Strength Steel: From Quasi-Static to Intermediate Strain Rates".METALS 8.1(2018):11. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。