Microhole Drilling in TiC Ceramic with a Femtosecond Pulsed Laser
文献类型：期刊论文
| 作者 | Zhang, J. Z.1; Liu, Y. S.2; Wang, Y. Q.1; Zhang, Y.1; Yang, X. J.3 |
| 刊名 | LASERS IN ENGINEERING
 |
| 出版日期 | 2018 |
| 卷号 | 41期号:43196页码:359-371 |
| 关键词 | Femtosecond Pulsed Laser Tic Ceramic Microholes Assisted Gas Pressure Feed Speed Morphology Machining Mechanism |
| ISSN号 | 0898-1507;1029-029X |
| 产权排序 | 3 |
| 英文摘要 | A femtosecond (fs) pulsed laser was employed to drill microholes in TiC ceramic. The Morphologies of microholes drilled at different assisted gas pressures and laser feeding speeds were investigated. Chemical compositions and chemical bonds of laser treated debris and untreated specimen were analysed. The mechanism of interaction between the femtosecond laser and the TiC ceramic was discussed. The results indicated that the assisted gas pressure had a greater effect on the morphologies of microholes, compared with the feeding speed. The entrance diameter of microholes was smaller than the exit diameter. The entrance roundness was more perfect than the exit roundness, and the entrance roundness decreased slightly with increasing gas pressure and feeding speed. Higher feeding speed was unfavourable to the morphologies of microholes. Ti, C and O were detected in laser treated debris. X-ray photoelectron spectroscopy (XPS) investigation showed that the C-Ti bond was broken and Ti2O3 and TiO2 were formed during drilling. |
| 语种 | 英语 |
| WOS记录号 | WOS:000445529800010 |
| 出版者 | OLD CITY PUBLISHING INC |
| 源URL | [http://ir.opt.ac.cn/handle/181661/30648]  |
| 专题 | 西安光学精密机械研究所_光子制造中心 |
| 通讯作者 | Zhang, Y. |
| 作者单位 | 1.Xian Univ Architecture & Technol, Coll Mat & Mineral Resources, Xian 710055, Shaanxi, Peoples R China 2.Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Shaanxi, Peoples R China 3.Chinese Acad Sci, Xian Inst Opt & Precis Mech, State Key Lab Transient Opt & Photon, Xian 710119, Shaanxi, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, J. Z.,Liu, Y. S.,Wang, Y. Q.,et al. Microhole Drilling in TiC Ceramic with a Femtosecond Pulsed Laser[J]. LASERS IN ENGINEERING,2018,41(43196):359-371. |
| APA | Zhang, J. Z.,Liu, Y. S.,Wang, Y. Q.,Zhang, Y.,&Yang, X. J..(2018).Microhole Drilling in TiC Ceramic with a Femtosecond Pulsed Laser.LASERS IN ENGINEERING,41(43196),359-371. |
| MLA | Zhang, J. Z.,et al."Microhole Drilling in TiC Ceramic with a Femtosecond Pulsed Laser".LASERS IN ENGINEERING 41.43196(2018):359-371. |
入库方式： OAI收割
来源：西安光学精密机械研究所
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。