Effect of graphene oxide sheet size on the curing kinetics and thermal stability of epoxy resins
文献类型：期刊论文
| 作者 | Wang,Xiao1 ; Jin,Jie2; Song,Mo2; Lin,Yue3
|
| 刊名 | Materials Research Express
 |
| 出版日期 | 2016-10-10 |
| 卷号 | 3期号:10 |
| 关键词 | graphene oxide epoxy resin curing kinetics thermal stability sheet size |
| ISSN号 | 2053-1591 |
| DOI | 10.1088/2053-1591/3/10/105303 |
| 通讯作者 | Wang, X (reprint author), Chinese Acad Sci, Chongqing Inst Green & Intelligent Technol, Ctr Membrane Technol & Applicat Engn, Chongqing 400714, Peoples R China. |
| 英文摘要 | Abstract This work revealed the influences of graphene oxide (GO) sheet size on the curing kinetics and thermal stability of epoxy resins. A series of GO/epoxy nanocomposites were prepared by the incorporation of three different sized GO sheets, namely GO-1, GO-2 and GO-3, the average size of which was 10.79 μm, 1.72 μm and 0.70 μm, respectively. The morphologies of the nanocomposites were observed by field emission gun scanning electron microscope. The dispersion quality of each sized GO was comparable in the epoxy matrix. The curing kinetics was investigated by means of differential scanning calorimetry and analyzed based on kinetics model. Addition of a small amount of GO (0.1 wt%) exhibited strong catalytic effect on the curing reaction of epoxy resin. The activation energy was reduced by 18.9%, 28.8% and 14.6% with addition of GO-1, GO-2 and GO-3, respectively. GO-2 with medium size (1.72 μm) showed the most effective catalysis on the cure. The thermal stability of the cured resins was evaluated based on thermogravimetric analysis. GO/epoxy nanocomposites showed improved thermal stability in the range of 420 °C–500 °C, compared with the pure resin. A?～?4% more residue was obtained in each of the incorporated system. The variations of GO sheet size did not influence the enhancement effect on the thermal stability. |
| 语种 | 英语 |
| WOS记录号 | IOP:2053-1591-3-10-105303 |
| 出版者 | IOP Publishing |
| 源URL | [http://119.78.100.138/handle/2HOD01W0/447]  |
| 专题 | 微纳制造与系统集成研究中心 |
| 作者单位 | 1.Center of Membrane Technology and Application Engineering, Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing 400714, People’s Republic of China 2.Department of Materials, Loughborough University, Loughborough, Leicestershire LE11 3TU, UK 3.School of Materials, University of Manchester, Oxford Road, Manchester M13 9PL, UK |
| 推荐引用方式 GB/T 7714 | Wang,Xiao,Jin,Jie,Song,Mo,et al. Effect of graphene oxide sheet size on the curing kinetics and thermal stability of epoxy resins[J]. Materials Research Express,2016,3(10). |
| APA | Wang,Xiao,Jin,Jie,Song,Mo,&Lin,Yue.(2016).Effect of graphene oxide sheet size on the curing kinetics and thermal stability of epoxy resins.Materials Research Express,3(10). |
| MLA | Wang,Xiao,et al."Effect of graphene oxide sheet size on the curing kinetics and thermal stability of epoxy resins".Materials Research Express 3.10(2016). |
入库方式： OAI收割
来源：重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。