Structure analysis of FTIR infrared spectrometer based on ANSYS/workbench
文献类型：会议论文
| 作者 | Chen, Zhaoming ; He, Guotian; He, Jiming; Xu, Zeyu; Lin, Yuanchang; He, Shixuan
|
| 出版日期 | 2013 |
| 会议日期 | September 21, 2012 - September 23, 2012 |
| 会议地点 | Chongqing, China |
| DOI | 10.4028/www.scientific.net/AMM.246-247.189 |
| 页码 | 189-193 |
| 通讯作者 | Chen, Z. (zhaomingc_sc@163.com) |
| 英文摘要 | The CAD software SolidWorks was used to create a three-dimensional finite element model of FTIR infrared spectrometer, and the model was imported into ANSYS/Workbench to modal analysis and harmonic response analysis. Through modal analysis, each order natural frequency and vibration shape were obtained. From modal shape analysis, all components of the stiffness strength and elastic deformation situation were got, and many times tests were carried to enhance stability of the structure and materials which had the most seriously deformation and direct effect impact to the quality of interferometer. The most sensitive frequency range of the system was concluded by harmonic response analysis, which provided a basis for further designing and improving of the spectrometer performance. © (2013) Trans Tech Publications, Switzerland. |
| 会议录 | 2nd International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2012
 |
| 语种 | 英语 |
| 电子版国际标准刊号 | 16627482 |
| ISSN号 | 16609336 |
| 源URL | [http://119.78.100.138/handle/2HOD01W0/4804]  |
| 专题 | 智能工业设计工程中心 机器人与3D打印技术创新中心 精准医疗单分子诊断技术研究中心 |
| 作者单位 | Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing, 401122, China |
| 推荐引用方式 GB/T 7714 | Chen, Zhaoming,He, Guotian,He, Jiming,et al. Structure analysis of FTIR infrared spectrometer based on ANSYS/workbench[C]. 见:. Chongqing, China. September 21, 2012 - September 23, 2012. |
入库方式： OAI收割
来源：重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。