热门
Investigation on 316L/316L-50W/W plate functionally graded materials fabricated by spark plasma sintering
文献类型：期刊论文
| 作者 | Tan, Chao1,2; Wang, Changzhen1,3; Wang, Sen1,4 ; Wang, Guoyu1,4; Ji, Lina1,4; Tong, Yangang2; Duan, Xuan-Ming1,4
|
| 刊名 | FUSION ENGINEERING AND DESIGN
 |
| 出版日期 | 2017-12-01 |
| 卷号 | 125页码:171-177 |
| ISSN号 | 0920-3796 |
| 关键词 | 316L W Spark plasma sintering Interface morphology Hardness |
| DOI | 10.1016/j.fusengdes.2017.08.001 |
| 英文摘要 | Tungsten plate (W-p), tungsten powder (W) and stainless steel 316L (316L) were used to fabricate 316L/W composites, respectively. Due to the less pores for the interface of 316L/W-p, W-p was used to fabricate 316L-50W/W-p as well as 316L/316L-50W/W-p. All samples were sintered for 5 min under conditions of 1050 degrees C and 45.5 MPa by spark plasma sintering method. Morphology and elements distribution of the interfaces were investigated by optical microscope, SEM and EDS. The hardness distribution for 316L/316L-50W/W-p functionally graded materials was also studied. Results revealed that there were residual pores for the interface of 316L/W. Homogeneous interfaces with less pores could be obtained for 316L-50W/W-p and 316L/316L-50W/W-p with 316L-50W milled nearly 5 h. Longer milling time leads to more interrnetallics, holes and micro-cracks at the interface, which is neither beneficial to obtain homogeneously distributed joints nor suitable to gain graded interfaces. The hardness analysis result gives the same conclusion as well. |
| 资助项目 | Bureau of Frontier Sciences and Education Chinese Academy of Sciences[KGZD-EW-T04] ; scientific research starting foundation for Returned Overseas Chinese Scholars, Ministry of Education of China |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| 出版者 | ELSEVIER SCIENCE SA |
| WOS记录号 | WOS:000419407300024 |
| 源URL | [http://172.16.51.4:88/handle/2HOD01W0/105]  |
| 专题 | 机器人与3D打印技术创新中心 |
| 通讯作者 | Ji, Lina; Tong, Yangang |
| 作者单位 | 1.Chinese Acad Sci, Chongqing Inst Green & Intelligent Technol, Chongqing 400714, Peoples R China 2.Chongqing Univ, Coll Mat Sci & Engn, Chongqing 400044, Peoples R China 3.Shandong Jianzhu Univ, Coll Mat Sci & Engn, Jinan 250101, Shandong, Peoples R China 4.Chongqing Key Lab Addit Mfg Technol & Syst, Chongqing 400714, Peoples R China |
| 推荐引用方式 GB/T 7714 | Tan, Chao,Wang, Changzhen,Wang, Sen,et al. Investigation on 316L/316L-50W/W plate functionally graded materials fabricated by spark plasma sintering[J]. FUSION ENGINEERING AND DESIGN,2017,125:171-177. |
| APA | Tan, Chao.,Wang, Changzhen.,Wang, Sen.,Wang, Guoyu.,Ji, Lina.,...&Duan, Xuan-Ming.(2017).Investigation on 316L/316L-50W/W plate functionally graded materials fabricated by spark plasma sintering.FUSION ENGINEERING AND DESIGN,125,171-177. |
| MLA | Tan, Chao,et al."Investigation on 316L/316L-50W/W plate functionally graded materials fabricated by spark plasma sintering".FUSION ENGINEERING AND DESIGN 125(2017):171-177. |
入库方式： OAI收割
来源：重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。