Mechanical properties and friction behaviors of CNT/AlSi10Mg composites produced by spark plasma sintering
文献类型：期刊论文
| 作者 | Wang, Lin-zhi1,2 ; Liu, Ying2; Wu, Jiao-jiao1; Zhang, Xi3
|
| 刊名 | INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS
 |
| 出版日期 | 2017-05-01 |
| 卷号 | 24期号:5页码:584-593 |
| 关键词 | metal matrix composites carbon nanotubes (CNTs) aluminum silicon magnesium alloys spark plasma sintering mechanical properties friction |
| ISSN号 | 1674-4799 |
| DOI | 10.1007/s12613-017-1440-3 |
| 通讯作者 | Liu, Y (reprint author), Sichuan Univ, Coll Mat Sci & Engn, Chengdu 610065, Peoples R China. |
| 英文摘要 | The mechanical properties and friction behaviors of CNT/AlSi10Mg composites produced by spark plasma sintering (SPS) were investigated. The results showed that the densities of the sintered composites gradually increased with increasing sintering temperature and that the highest microhardness and compressive strength were achieved in the specimen sintered at 450A degrees C. CNTs dispersed uniformly in the Al-Si10Mg matrix when the addition of CNTs was less than 1.5wt%. However, when the addition of CNTs exceeded 1.5wt%, the aggregation of CNTs was clearly observed. Moreover, the mechanical properties (including the densities, compressive strength, and microhardness) of the composites changed with CNT content and reached a maximum value when the CNT content was 1.5wt%. Meanwhile, the minimum average friction coefficient and wear rate of the CNT/AlSi10Mg composites were obtained with 1.0wt% CNTs. |
| 资助项目 | National Natural Science Foundation of China (NSFC, China)[51405467] ; Chongqing Research of Application Foundation and Advanced Technology[cstc2016jcyj A0016] ; Key Program of the Chinese Academy of Sciences[KGZD-EW-T0] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering ; Mining & Mineral Processing |
| 语种 | 英语 |
| WOS记录号 | WOS:000400653700013 |
| 出版者 | SPRINGER |
| 源URL | [http://172.16.51.4:88/handle/2HOD01W0/236]  |
| 专题 | 机器人与3D打印技术创新中心 |
| 通讯作者 | Liu, Ying |
| 作者单位 | 1.Chinese Acad Sci, Chongqing Inst Green & Intelligent Technol, Chongqing Key Lab Addit Mfg Technol & Syst, Chongqing 400714, Peoples R China 2.Sichuan Univ, Coll Mat Sci & Engn, Chengdu 610065, Peoples R China 3.Southwest Jiaotong Univ, Coll Mat Sci & Engn, Chengdu 610065, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, Lin-zhi,Liu, Ying,Wu, Jiao-jiao,et al. Mechanical properties and friction behaviors of CNT/AlSi10Mg composites produced by spark plasma sintering[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,2017,24(5):584-593. |
| APA | Wang, Lin-zhi,Liu, Ying,Wu, Jiao-jiao,&Zhang, Xi.(2017).Mechanical properties and friction behaviors of CNT/AlSi10Mg composites produced by spark plasma sintering.INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,24(5),584-593. |
| MLA | Wang, Lin-zhi,et al."Mechanical properties and friction behaviors of CNT/AlSi10Mg composites produced by spark plasma sintering".INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS 24.5(2017):584-593. |
入库方式： OAI收割
来源：重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。