Preparation of CNT/AlSi10Mg composite powders by high-energy ball milling and their physical properties
文献类型：期刊论文
| 作者 | Wang, Lin-zhi1,2 ; Liu, Ying1; Wei, Wen-hou2; An, Xu-guang1; Zhang, Tao3; Pu, Ya-yun3
|
| 刊名 | INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS
 |
| 出版日期 | 2016-03-01 |
| 卷号 | 23期号:3页码:330-338 |
| 关键词 | Metal Matrix Composites Aluminum Alloys Carbon Nanotubes Powder Metallurgy Particle Size Distribution Ball Milling Physical Properties |
| ISSN号 | 1674-4799 |
| DOI | 10.1007/s12613-016-1242-z |
| 英文摘要 | This study investigated the effects of carbon nanotube (CNT) concentration on the micro-morphologies and laser absorption properties of CNT/AlSi10Mg composite powders produced by high-energy ball milling. A scanning electron microscope, X-ray diffractometer, laser particle size analyzer, high-temperature synchronous thermal analyzer, and UV/VIS/NIR spectrophotometer were used for the analysis of micrographs, phases, granulometric parameters, thermal properties, and laser absorption properties of the composite powders, respectively. The results showed that the powders gradually changed from flake- to granule-like morphology and the average particle size sharply decreased with increases in milling rotational speed and milling time. Moreover, a uniform dispersion of CNTs in AlSi10Mg powders was achieved only for a CNT content of 1.5wt%. Laser absorption values of the composite powders were also observed to gradually increase with the increase of CNT concentration, and different spectra displayed characteristic absorption peaks at a wavelength of approximately 826 nm. |
| 资助项目 | National Natural Science Foundation of China[51405467] ; Research Fund for Scientific and Technological Projects of Chongqing[2012ggB40003] ; Research Fund for Scientific and Technological Projects of Chongqing[cstc2013yykfC00006] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering ; Mining & Mineral Processing |
| 语种 | 英语 |
| WOS记录号 | WOS:000371257200011 |
| 出版者 | SPRINGER |
| 源URL | [http://119.78.100.138/handle/2HOD01W0/2312]  |
| 专题 | 机器人与3D打印技术创新中心 |
| 作者单位 | 1.Sichuan Univ, Coll Mat Sci & Engn, Chengdu 610065, Peoples R China 2.Chinese Acad Sci, Chongqing Key Lab Multiscale Mfg Technol, Chongqing Inst Green & Intelligent Technol, Chengdu 400714, Peoples R China 3.Chongqing Univ, Coll Mat Sci & Engn, Chengdu 400044, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, Lin-zhi,Liu, Ying,Wei, Wen-hou,et al. Preparation of CNT/AlSi10Mg composite powders by high-energy ball milling and their physical properties[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,2016,23(3):330-338. |
| APA | Wang, Lin-zhi,Liu, Ying,Wei, Wen-hou,An, Xu-guang,Zhang, Tao,&Pu, Ya-yun.(2016).Preparation of CNT/AlSi10Mg composite powders by high-energy ball milling and their physical properties.INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,23(3),330-338. |
| MLA | Wang, Lin-zhi,et al."Preparation of CNT/AlSi10Mg composite powders by high-energy ball milling and their physical properties".INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS 23.3(2016):330-338. |
入库方式： OAI收割
来源：重庆绿色智能技术研究院
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。