Optical design of f-Theta lens for dual wavelength selective laser melting
文献类型：会议论文
| 作者 | Feng, Lianhua1,2; Cao, Hongzhong2 ; Zhang, Ning1; Xu, Xiping1; Duan, Xuanming2
|
| 出版日期 | 2016 |
| 会议日期 | May 9, 2016 - May 11, 2016 |
| 会议地点 | Beijing, China |
| DOI | 10.1117/12.2246995 |
| 英文摘要 | F-Theta lens is an important unit for selective laser melting (SLM) manufacture. The dual wavelength f-Theta lens has not been used in SLM manufacture. Here, we present the design of the f-Theta lens which satisfies SLM manufacture with coaxial 532 nm and 1030 nm∼1080 nm laser beams. It is composed of three pieces of spherical lenses. The focal spots for 532 nm laser and 1030 nm∼1080 nm laser are smaller than 35 μm and 70 μm, respectively. The results meet the demands of high precision SLM. The chromatic aberration could cause separation between two laser focal spots in the scanning plane, so chromatic aberration correction is very important to our design. The lateral color of the designed f-Theta lens is less than 11 μm within the scan area of 150 mm x 150 mm, which meet the application requirements of dual wavelength selective laser melting. © 2016 SPIE. |
| 会议录 | International Symposium on Advanced Optical Design and Manufacturing Technologies and International Symposium on Astronomical Telescope and Instrumentation
 |
| 语种 | 英语 |
| 电子版国际标准刊号 | 1996756X |
| ISSN号 | 0277786X |
| 源URL | [http://119.78.100.138/handle/2HOD01W0/4677]  |
| 专题 | 机器人与3D打印技术创新中心 |
| 作者单位 | 1.Opto-Electronic Engineering College, Changchun University of Science and Technology, Changchun; 130022, China; 2.Research Center for Additive Manufacturing (3D Printing) Technology, Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing; 400714, China |
| 推荐引用方式 GB/T 7714 | Feng, Lianhua,Cao, Hongzhong,Zhang, Ning,et al. Optical design of f-Theta lens for dual wavelength selective laser melting[C]. 见:. Beijing, China. May 9, 2016 - May 11, 2016. |
入库方式： OAI收割
来源：重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。