Microstructure and mechanical properties of in situ formed TiC-reinforced Ti-6Al-4V matrix composites
文献类型：期刊论文
| 作者 | Wei, Wen-Hou1 ; Shao, Ze-Ning2; Shen, Jun1; Duan, Xuan-Ming1
|
| 刊名 | MATERIALS SCIENCE AND TECHNOLOGY
 |
| 出版日期 | 2018 |
| 卷号 | 34期号:2页码:191-198 |
| ISSN号 | 0267-0836 |
| 关键词 | Carbon nanotubes Ti-6Al-4V microstructure hardness compressive yield strength |
| DOI | 10.1080/02670836.2017.1366737 |
| 英文摘要 | Carbon nanotubes were blended into a Ti-6Al-4V matrix to synthesize titanium carbide (TiC) in situ, via spark plasma sintering. The microstructure and mechanical properties of both the monolithic Ti-6Al-4V alloys and the TiC/Ti-6Al-4V composites were studied to evaluate the strengthening effects of TiC on the Ti-6Al-4V matrix. The morphologies obtained by scanning electronic microscopy and optical microscopy indicated that the grain size of both the Ti-6Al-4V alloy and the TiC/Ti-6Al-4V composite decreased with increasing planetary ball-milling (PBM) speed, leading to an increase in the hardness of the investigated materials. The compressive yield strength of the monolithic Ti-6Al-4V alloys and the TiC/Ti-6Al-4V composites initially increased and then decreased with increasing PBM speed. The strengthening and fracture mechanisms were studied. |
| 资助项目 | National High Technology Research and Development Program of China (863 Program)[2015AA042501] ; West Light Foundation of the Chinese Academy of Sciences |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | TAYLOR & FRANCIS LTD |
| WOS记录号 | WOS:000424554400008 |
| 源URL | [http://119.78.100.138/handle/2HOD01W0/6249]  |
| 专题 | 机器人与3D打印技术创新中心 |
| 通讯作者 | Wei, Wen-Hou |
| 作者单位 | 1.Chinese Acad Sci, Chongqing Inst Green & Intelligent Technol, Chongqing Key Lab Addit Mfg Technol & Syst, Chongqing 400714, Peoples R China 2.Chongqing Changan Automobile Co Ltd, Inst Oushang Automobile, Chongqing, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wei, Wen-Hou,Shao, Ze-Ning,Shen, Jun,et al. Microstructure and mechanical properties of in situ formed TiC-reinforced Ti-6Al-4V matrix composites[J]. MATERIALS SCIENCE AND TECHNOLOGY,2018,34(2):191-198. |
| APA | Wei, Wen-Hou,Shao, Ze-Ning,Shen, Jun,&Duan, Xuan-Ming.(2018).Microstructure and mechanical properties of in situ formed TiC-reinforced Ti-6Al-4V matrix composites.MATERIALS SCIENCE AND TECHNOLOGY,34(2),191-198. |
| MLA | Wei, Wen-Hou,et al."Microstructure and mechanical properties of in situ formed TiC-reinforced Ti-6Al-4V matrix composites".MATERIALS SCIENCE AND TECHNOLOGY 34.2(2018):191-198. |
入库方式： OAI收割
来源：重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。