Design of freeform LED lens with large light deflection angle for road lighting application
文献类型:会议论文
作者 | Yin, Shaoyun1![]() ![]() |
出版日期 | 2012 |
会议日期 | November 5, 2012 - November 6, 2012 |
会议地点 | Beijing, China |
DOI | 10.1117/12.999767 |
通讯作者 | Dua, C. (cldu@cigit.ac.cn) |
英文摘要 | The deflection of light of a single optical surface is limited by the Fresnel reflection loss and it is usually not enough to meet the requirements in large road width, tilt lighting LED lens design. This paper presents a method which greatly increases the light deflection angle of LED lens by combining a tilting aspherical surface with a freeform surface. Using this design method, a road lighting LED lens for length L= 30m, road width W=12m and tilt angle θ= 15° is designed and manufactured. The experimental results show that the overall road luminance uniformity is as high as 0.7. This design method greatly expand the light distributing capacity of the free-form surface LED lens, and it can be widely used in the design of LED road lighting lens and other illumination applications where large light deflection angle is needed. © 2012 SPIE. |
会议录 | LED and Display Technologies II
![]() |
语种 | 英语 |
电子版国际标准刊号 | 1996756X |
ISSN号 | 0277786X |
源URL | [http://119.78.100.138/handle/2HOD01W0/4763] ![]() |
专题 | 集成光电技术研究中心 |
作者单位 | 1.CAS, Chongqing Institute of Green and Intelligent Technology, Chongqing, China; 2.CAS, Institute of Optics and Electronics, Chengdu, Sichuan Province, China |
推荐引用方式 GB/T 7714 | Yin, Shaoyun,Wang, Zhongxun,Sun, Xiuhui,et al. Design of freeform LED lens with large light deflection angle for road lighting application[C]. 见:. Beijing, China. November 5, 2012 - November 6, 2012. |
入库方式: OAI收割
来源:重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。