中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Simulation and test of a thermioic hairpin source DC electron beam gun

文献类型:期刊论文

作者ul Islam, G; Rehman, A; Iqbal, M; Zhou, Z; Zhou ZS(周祖圣)
刊名OPTIK
出版日期2016
卷号127期号:4页码:1905
关键词Electron gun Acceleration potential Current density Emittance EGUN
DOI10.1016/j.ijleo.2015.11.132
通讯作者Iqbal, Munawar
文献子类Article
英文摘要A hairpin source electron gun was simulated and tested for its emission characteristics. We calculated beam emittance 4.3 pi-mm-mR and average current density 5.80 A/cm(2) which corresponds to power density 5.80 x 10(4) W/cm(2) with 0.9 mm of beam waist diameter at 113 mm in the post anode region. The simulation and test results were found in agreement at 10 kV of acceleration potential. We also calculated the variation of current density and emittance with acceleration potential up to the saturation limit of the gun (100 kV). The gun is useful for electron optical devices, electron accelerators and deep weld joints of refractory metals. (C) 2015 Elsevier GmbH. All rights reserved.
语种英语
WOS记录号WOS:000370097900063
源URL[http://ir.ihep.ac.cn/handle/311005/260565]  
专题高能物理研究所_加速器中心
作者单位中国科学院高能物理研究所
推荐引用方式
GB/T 7714
ul Islam, G,Rehman, A,Iqbal, M,et al. Simulation and test of a thermioic hairpin source DC electron beam gun[J]. OPTIK,2016,127(4):1905.
APA ul Islam, G,Rehman, A,Iqbal, M,Zhou, Z,&周祖圣.(2016).Simulation and test of a thermioic hairpin source DC electron beam gun.OPTIK,127(4),1905.
MLA ul Islam, G,et al."Simulation and test of a thermioic hairpin source DC electron beam gun".OPTIK 127.4(2016):1905.

入库方式: OAI收割

来源:高能物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。