Gas-Flow Tailoring Fabrication of Graphene-like Co-Nx-C Nanosheet Supported Sub-10 nm PtCo Nanoalloys as Synergistic Catalyst for Air-Cathode Microbial Fuel Cells
文献类型：期刊论文
| 作者 | Cao, Chun1,2; Wei, Liling1; Zhai, Qiran3; Ci, Jiliang2,4; Li, Weiwei1,2; Wang, Gang1,2; Shen, Jianquan1 |
| 刊名 | ACS APPLIED MATERIALS & INTERFACES
 |
| 出版日期 | 2017-07-12 |
| 卷号 | 9期号:27页码:22465-22475 |
| 关键词 | Microbial Fuel Cells Graphene-like Carbon Synergistic Catalyst N/co-dual Doping Ptco Nanoalloys |
| 英文摘要 | In this work, we presented a novel, facile, and template-free strategy for fabricating graphene-like N-doped carbon as oxygen reduction catalyst in sustainable microbial fuel cells (MFCs) by using an ion-inducing and spontaneous gas-flow tailoring effect from a unique nitrogen-rich polymer gel precursor which has riot been reported in materials science. Remarkably, by introduction of trace platinum-and cobalt-precursor in polymer gel, highly dispersed sub-10 nm PtCo nanoalloys can be in situ grown and anchored on graphene-like carbon. The as-prepared catalysts were investigated by a series of physical characterizations, electrochemical measurements, and microbial fuel cell tests. Interestingly, even with a low Pt content (5.13 wt %), the most active Co/N codoped carbon supported PtCo nanoalloys (Co-N-C/Pt) exhibited dramatically improved catalytic activity toward oxygen reduction reaction coupled with superior output power density (1008 +/- 43 mW m(-2)) in MFCs, which was 29.40% higher than the state of the art Pt/C (20 wt %). Notability, the distinct catalytic activity of Co-N-C/Pt was attributed to the highly efficient synergistic catalytic effect of Co-Nx-C and PtCo nanoalloys. Therefore, Co-N-C/Pt should be a promising oxygen reduction catalyst for application in MFCs. Further, the novel strategy for graphene-like carbon also can be widely used in many other energy conversion and storage devices. |
| 语种 | 英语 |
| 源URL | [http://ir.iccas.ac.cn/handle/121111/41106]  |
| 专题 | 化学研究所_绿色印刷实验室 |
| 作者单位 | 1.Chinese Acad Sci, Inst Chem, Key Lab Green Printing, Beijing Natl Lab Mol Sci, Beijing 100190, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 3.Peking Univ, Coll Chem & Mol Engn, Beijing 100871, Peoples R China 4.Chinese Acad Sci, Tech Inst Phys & Chem, State Engn Res Ctr Engn Plast, Beijing 100190, Peoples R China |
| 推荐引用方式 GB/T 7714 | Cao, Chun,Wei, Liling,Zhai, Qiran,et al. Gas-Flow Tailoring Fabrication of Graphene-like Co-Nx-C Nanosheet Supported Sub-10 nm PtCo Nanoalloys as Synergistic Catalyst for Air-Cathode Microbial Fuel Cells[J]. ACS APPLIED MATERIALS & INTERFACES,2017,9(27):22465-22475. |
| APA | Cao, Chun.,Wei, Liling.,Zhai, Qiran.,Ci, Jiliang.,Li, Weiwei.,...&Shen, Jianquan.(2017).Gas-Flow Tailoring Fabrication of Graphene-like Co-Nx-C Nanosheet Supported Sub-10 nm PtCo Nanoalloys as Synergistic Catalyst for Air-Cathode Microbial Fuel Cells.ACS APPLIED MATERIALS & INTERFACES,9(27),22465-22475. |
| MLA | Cao, Chun,et al."Gas-Flow Tailoring Fabrication of Graphene-like Co-Nx-C Nanosheet Supported Sub-10 nm PtCo Nanoalloys as Synergistic Catalyst for Air-Cathode Microbial Fuel Cells".ACS APPLIED MATERIALS & INTERFACES 9.27(2017):22465-22475. |
入库方式： OAI收割
来源：化学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。