Improving waterproof/breathable performance of electrospun poly(vinylidene fluoride) fibrous membranes by thermo-pressing
文献类型:期刊论文
作者 | Li, X; Lin, JY; Bian, FG; Zeng, YC |
刊名 | JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
![]() |
出版日期 | 2018 |
卷号 | 56期号:1页码:36-45 |
关键词 | Waterproof-breathable Application Nanofibrous Membranes Mechanical-properties Carbon Nanotubes Molecular-orientation Thin-films Fibers Fabrics Morphology Nanocomposites |
ISSN号 | 0887-6266 |
DOI | 10.1002/polb.24534 |
文献子类 | 期刊论文 |
英文摘要 | Facing the ever-increasing demand for waterproof/breathable materials, a rapid and efficient fabrication method of these functional materials with excellent performance as well as robust mechanical properties remains challenging. Herein, a simple and scalable strategy referred to as thermo-pressing is introduced to improve the waterproof/breathable performance and mechanical properties of electrospun PVDF fibrous membranes. The synergistic effect of temperature and pressure acted on the electrospun PVDF membranes on the fiber morphology and crystal structure was investigated, which can be able to effectively enhance waterproof performance and mechanical properties, endowing the as-prepared membranes with a modest breathability. The membranes thermo-pressed at 150 degrees C with a pressure of 8.27 MPa exhibit robust tensile strength of 40.65 MPa, which is superior to those of the previous reports (below 32.8 MPa). Notably, the optimized membranes enable to show a high hydrostatic pressure of 102 kPa, good WVTR of 10.87 kgm(-2)d(-1) and excellent abrasion resistance, which implies that the thermo-pressing is an efficient and facile way to steer the fiber morphology and crystal structure of electrospun membranes to improve their application performance. (c) 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018, 56, 36-45 |
语种 | 英语 |
WOS记录号 | WOS:000416013700003 |
源URL | [http://ir.sinap.ac.cn/handle/331007/29042] ![]() |
专题 | 上海应用物理研究所_中科院上海应用物理研究所2011-2017年 |
作者单位 | 1.Li, X 2.Lin, JY 3.Bian, FG 4.Zeng, YC |
推荐引用方式 GB/T 7714 | Li, X,Lin, JY,Bian, FG,et al. Improving waterproof/breathable performance of electrospun poly(vinylidene fluoride) fibrous membranes by thermo-pressing[J]. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS,2018,56(1):36-45. |
APA | Li, X,Lin, JY,Bian, FG,&Zeng, YC.(2018).Improving waterproof/breathable performance of electrospun poly(vinylidene fluoride) fibrous membranes by thermo-pressing.JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS,56(1),36-45. |
MLA | Li, X,et al."Improving waterproof/breathable performance of electrospun poly(vinylidene fluoride) fibrous membranes by thermo-pressing".JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS 56.1(2018):36-45. |
入库方式: OAI收割
来源:上海应用物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。