中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Multi-objective topology optimization design and test for support structure of star sensor

文献类型:期刊论文

作者Cheng, L.; D. Wang; S. Gu; F. Gao; L. Yang and L. Li
刊名Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
出版日期2017
卷号46期号:5
英文摘要According to the special requirements of star sensor for micro satellite, combined with special working performance and environment of star sensor, multi-objective optimization design was carried out on the support structure of star sensor by using topological method, and finite element analysis and test were also done. First, the basic theory of modal analysis and random vibration response were introduced in this paper. The expression formula of multi-objective topology optimization was derived. Second, the goal of optimization contains volume minimization of the support structure, and RMS value minimization of 4 installation point in the support structure where star sensor was installed. The topology optimization model of the support structure was established under the restriction of the lowest natural frequency. The topology optimization design was carried out by using OptiStruct software. Then, the modal analysis and random vibration response analysis of the optimized support structure were made by using finite element analysis software MSC.PatranNastran. The natural frequency was 327 Hz, the maximum amplification rate of the RMS value of the installation point was 0.55. Finally, the support structure was tested with the random vibration test. The test results are in good agreement with the finite element analysis results, and the maximum error is 0.07. The support structure of star sensor meets the requirements of the performance index for micro satellite. 2017, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
语种中文
源URL[http://ir.ciomp.ac.cn/handle/181722/58864]  
专题长春光学精密机械与物理研究所_中科院长春光机所知识产出
推荐引用方式
GB/T 7714
Cheng, L.,D. Wang,S. Gu,et al. Multi-objective topology optimization design and test for support structure of star sensor[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2017,46(5).
APA Cheng, L.,D. Wang,S. Gu,F. Gao,&L. Yang and L. Li.(2017).Multi-objective topology optimization design and test for support structure of star sensor.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,46(5).
MLA Cheng, L.,et al."Multi-objective topology optimization design and test for support structure of star sensor".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 46.5(2017).

入库方式: OAI收割

来源:长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。