Fast generation of micro structured surface by applying PCD tools in micro turning
文献类型：期刊论文
| 作者 | Zhang, J. G.; Q. S. Li; H. Zhang; Q. L. Cui; T. Cui; C. Ge; Z. Sun and D. F. Zhang |
| 刊名 | International Journal of Advanced Manufacturing Technology
 |
| 出版日期 | 2017 |
| 卷号 | 90期号:1 |
| 英文摘要 | This paper studies the fast generation of micro structured surface by means of micro polycrystalline diamond (PCD) tools, which are manufactured by applying the wire cut electrical discharge machining (WEDM). Firstly, the fabrication of micro PCD tools is introduced in the WEDM process. Furthermore, by applying the micro cutting tools, the micro structures are directly fabricated on the alumina workpiece with just a simple micro turning process, which verifies the feasibility of the proposed microfabrication method. Following that, the tool wear in the micro turning process is also investigated. Although there is no considerable tool shape deterioration and tool edge damage, the adhesion of the workpiece material to the cutting edge is observed, which may cause the increase of cutting forces and the decrease of the machining accuracy. As following, a series of fundamental micro turning tests are conducted, and the influence of cutting conditions on the machined structure quality is investigated in detail. Finally, it is proposed that the micro/nano structures can also provide the self-cleaning properties due to the low surface energy. The proposed microfabrication process is expected to become a potential method for the fast generation of micro structured surface in the future. |
| 语种 | 英语 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/59434]  |
| 专题 | 长春光学精密机械与物理研究所_中科院长春光机所知识产出 |
| 推荐引用方式 GB/T 7714 | Zhang, J. G.,Q. S. Li,H. Zhang,et al. Fast generation of micro structured surface by applying PCD tools in micro turning[J]. International Journal of Advanced Manufacturing Technology,2017,90(1). |
| APA | Zhang, J. G..,Q. S. Li.,H. Zhang.,Q. L. Cui.,T. Cui.,...&Z. Sun and D. F. Zhang.(2017).Fast generation of micro structured surface by applying PCD tools in micro turning.International Journal of Advanced Manufacturing Technology,90(1). |
| MLA | Zhang, J. G.,et al."Fast generation of micro structured surface by applying PCD tools in micro turning".International Journal of Advanced Manufacturing Technology 90.1(2017). |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。