Automatic low-order aberration compensator for solid-state slab lasers
文献类型：期刊论文
| 作者 | Yu, Xin1,2,3,4; Dong, Lizhi1,3; Lai, Boheng1,3,4; Yang, Ping1,3; Kong, Qingfeng1,2,3,4; Yang, Kangjian1,3,4; Liu, Yong2; Tang, Guomao1,3; Xu, Bing1,3 |
| 刊名 | Proceedings of SPIE: Laser Beam Shaping XVII
 |
| 出版日期 | 2016 |
| 卷号 | 9950页码:99500I |
| 关键词 | Aspect Ratio Compensation (Personnel) Landforms Laser Beam Effects Laser Beams Ray Tracing Wavefronts |
| ISSN号 | 0277-786X |
| DOI | 10.1117/12.2238392 |
| 文献子类 | C |
| 英文摘要 | Slab geometry is a promising architecture for power scaling of solid-state lasers. By propagating the laser beams along zigzag path in the gain medium, the thermal effects can be well compensated. However, in the non-zigzag direction, the thermal effects are not compensated. Among the overall aberrations in the slab lasers, the major contributors are two low-order aberrations: astigmatism and defocus, which can range up to over 100 microns (peak to valley), leading to detracted beam quality. Another problem with slab lasers is that the output beams are generally in a rectangular aperture with high aspect ratio (normally 1:10), where square beams are favorable for many applications. In order to solve these problems, we propose an automatic low-order aberration compensation system. This system is composed of three lenses fixed on a motorized rail, one is a spherical lens and the others are cylindrical lenses. Astigmatism and defocus can be compensated by merely adjusting the distances between the lenses. Two wave-front sensors are employed in this compensation system, one is used for detecting the initial parameters of the beams, and the other one is used for detecting the remaining aberrations after correction. The adjustments of the three lenses are directly calculated based on beam parameters using ray tracing method. The initial size of the beam is 3.2mm by 26mm, and peak to valley(PV) value of the wave-front is 33.07λ(λ=1064nm). After correction, the dimension becomes 40mm by 40mm, and peak to valley (PV) value of the wave-front is less than 2 microns. © 2016 SPIE. |
| 语种 | 英语 |
| WOS记录号 | WOS:000391363600014 |
| 资助机构 | The Society of Photo-Optical Instrumentation Engineers (SPIE) |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/8450]  |
| 专题 | 光电技术研究所_自适应光学技术研究室（八室） |
| 作者单位 | 1.Key Laboratory on Adaptive Optics, Chinese Academy of Sciences, Chengdu, Sichuan 2.610209, China 3.School of Optoelectronic Information, University of Electronic Science and Technology of China, Chengdu, Sichuan 4.610054, China 5.Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 6.610209, China 7.University of Chinese Academy of Sciences, Beijing 8.100039, China |
| 推荐引用方式 GB/T 7714 | Yu, Xin,Dong, Lizhi,Lai, Boheng,et al. Automatic low-order aberration compensator for solid-state slab lasers[J]. Proceedings of SPIE: Laser Beam Shaping XVII,2016,9950:99500I. |
| APA | Yu, Xin.,Dong, Lizhi.,Lai, Boheng.,Yang, Ping.,Kong, Qingfeng.,...&Xu, Bing.(2016).Automatic low-order aberration compensator for solid-state slab lasers.Proceedings of SPIE: Laser Beam Shaping XVII,9950,99500I. |
| MLA | Yu, Xin,et al."Automatic low-order aberration compensator for solid-state slab lasers".Proceedings of SPIE: Laser Beam Shaping XVII 9950(2016):99500I. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。