Athermal design for mid-wave infrared lens with long EFFL
文献类型：期刊论文
| 作者 | Bai, Yu1,2,3; Xing, Tingwen1 |
| 刊名 | Proceedings of SPIE: 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies
 |
| 出版日期 | 2016 |
| 卷号 | 9683页码:96830T |
| 关键词 | Image Quality Manufacture Optical Design Optical Systems Thermoanalysis |
| ISSN号 | 0277-786X |
| DOI | 10.1117/12.2246259 |
| 文献子类 | C |
| 英文摘要 | When the environment temperature has changed, then each parameter in infrared lens has also changed, thus the image quality became bad, so athermal technology is one of key technology in designing infrared lens. The temperature influence of each parameter in infrared lens is analyzed in the paper. In the paper, an athermal mid-wave infrared optical system with long focal length by Code-v optical design software was presented. The parameters of the athermal infrared system are 4.0 f/number, 704mm effective focal length (EFL), 1° field of view and 3.7-4.8 μm spectrum region 100% cold shield efficiency. When the spatial frequency is 16lp/mm, the Modulation Transfer Function (MTF) of all the field of view was above 0.5 from the working temperature range -40°C to 60°C. From the image quality and thermal analysis result, we knew that the lens had good athermal performance. © 2016 SPIE. |
| 语种 | 英语 |
| WOS记录号 | WOS:000387745800028 |
| 资助机构 | Chinese Academy of Sciences, Institute of Optics and Electronics (IOE) ; The Chinese Optical Society (COS) |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/8465]  |
| 专题 | 光电技术研究所_应用光学研究室（二室） |
| 作者单位 | 1.Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu, Sichuan 2.610209, China 3.University of Electronic Science and Technology of China, Chengdu, Sichuan 4.610209, China 5.University of Chinese Academy of Sciences, Beijing 6.100039, China |
| 推荐引用方式 GB/T 7714 | Bai, Yu,Xing, Tingwen. Athermal design for mid-wave infrared lens with long EFFL[J]. Proceedings of SPIE: 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies,2016,9683:96830T. |
| APA | Bai, Yu,&Xing, Tingwen.(2016).Athermal design for mid-wave infrared lens with long EFFL.Proceedings of SPIE: 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies,9683,96830T. |
| MLA | Bai, Yu,et al."Athermal design for mid-wave infrared lens with long EFFL".Proceedings of SPIE: 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies 9683(2016):96830T. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。