The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel
文献类型：期刊论文
| 作者 | Liu, Min; Lupoi, Rocco; Li, Hua; Yin, Shuo; Chen, Chaoyue; Yan, Xingchen; Feng, Xiaohua; Jenkins, Richard; O'Reilly, Peter |
| 刊名 | ADDITIVE MANUFACTURING
 |
| 出版日期 | 2018 |
| 卷号 | 22页码:592-600 |
| 关键词 | 316l Stainless-steel Densification Behavior Metallic Components Process Parameters Microstructure Precipitation Austenite Evolution Powder Parts |
| 英文摘要 | Selective laser melting (SLM) is an additive manufacturing and 3D printing technology which offers flexibility in geometric design and rapid production of complex structures. Maraging steels have high strength and good ductility, and therefore have been widely used in aerospace and tooling sectors for many years. This work aims to study the influence of aging temperature and aging time on the microstructure, mechanical property (hardness, strength and ductility) and tribological property of SLM maraging 18Ni-300 steel. The results reveal that the aging conditions had a significant impact on the strength and wear-resistance of the SLM maraging steel. The optimal aging conditions for the SLM maraging steel produced in this work were 490 degrees C for 3 h under which strength and wear-resistance were maximised. Lower or higher aging temperature led to under-aging or over-aging phenomena, reducing the strength and wear-resistance performance. Shorter or longer aging time also resulted in the decrease of strength and wear-resistance performance of the SLM maraging steel as compared with the optimal conditions. The variation of the mechanical and tribological properties is primarily due to changes in phase compositions and microstructures of the SLM maraging steels. |
| 学科主题 | Thermodynamics ; Engineering |
| 语种 | 英语 |
| 公开日期 | 2018-12-04 |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/17273]  |
| 专题 | 2018专题 |
| 推荐引用方式 GB/T 7714 | Liu, Min,Lupoi, Rocco,Li, Hua,et al. The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel[J]. ADDITIVE MANUFACTURING,2018,22:592-600. |
| APA | Liu, Min.,Lupoi, Rocco.,Li, Hua.,Yin, Shuo.,Chen, Chaoyue.,...&O'Reilly, Peter.(2018).The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel.ADDITIVE MANUFACTURING,22,592-600. |
| MLA | Liu, Min,et al."The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel".ADDITIVE MANUFACTURING 22(2018):592-600. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。