Fabrication and microstructure of liquid sintered porous SiC ceramics through spark plasma sintering
文献类型：期刊论文
| 作者 | Zhao, Piqi1; Li, Qinggang1,2; Yi, Ruiji3; Wang, Zhi; Lu, Lingchao1; Cheng, Xin1; Dong, Shaoming2 |
| 刊名 | JOURNAL OF ALLOYS AND COMPOUNDS
 |
| 出版日期 | 2018 |
| 卷号 | 748页码:36 |
| 关键词 | SiC Porous ceramics Spark plasma sintering Grain growth |
| ISSN号 | 0925-8388 |
| DOI | 10.1016/j.jallcom.2018.03.122 |
| 英文摘要 | 6H-SiC porous SiC ceramics accompanied by the formation of large clubbed and tabular grains were successfully fabricated at 1800 degrees C under an applied pressure of 50 MPa for 5 min by spark plasma sintering technique without introducing any pore-creating agent. The phase composition, microstructure and properties of porous SiC ceramics were investigated. The measured porosity of the specimens was 35.7% and the mean pore size varied in the range of 0.3-3 mu m. The sintered specimen had a strength of 103 MPa, a fracture toughness of 2.89 MPam(1/2), and a density of 1.85g/cm(3). The mechanisms of porous structure and grain growth were elucidated. (C) 2018 Elsevier B.V. All rights reserved. |
| 学科主题 | Chemistry, Physical ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| WOS记录号 | WOS:000429838900005 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | Authors appreciate the financial support of the National Natural Science Foundation of China under the Grant No. of 51602126 and No. 51621091, the Grant No. of 51372099. Authors also appreciate the financial supported by Program for Scientific research innovation team in Colleges and universities of Shandong Province and the financial supported by the Opening Project of State Key Laboratory of High Performance Ceramics and Superfine Microstructure (SKL201601SIC) and the Project funded by China Postdoctoral Science Foundation of 2016M602184. Supports from the 111 Project of International Corporation on Advanced Cement-based Materials (No. D17001) is greatly appreciated. ; Authors appreciate the financial support of the National Natural Science Foundation of China under the Grant No. of 51602126 and No. 51621091, the Grant No. of 51372099. Authors also appreciate the financial supported by Program for Scientific research innovation team in Colleges and universities of Shandong Province and the financial supported by the Opening Project of State Key Laboratory of High Performance Ceramics and Superfine Microstructure (SKL201601SIC) and the Project funded by China Postdoctoral Science Foundation of 2016M602184. Supports from the 111 Project of International Corporation on Advanced Cement-based Materials (No. D17001) is greatly appreciated. |
| 源URL | [http://ir.sic.ac.cn/handle/331005/24874]  |
| 专题 | 中国科学院上海硅酸盐研究所 |
| 作者单位 | 1.Univ Jinan, Sch Mat Sci & Engn, Jinan 250022, Shandong, Peoples R China 2.Shandong Prov Key Lab Preparat & Measurement Bldg, Jinan 250022, Shandong, Peoples R China 3.Chinese Acad Sci, Shanghai Inst Ceram, State Key Lab High Performance Ceram & Superfine, Shanghai 200050, Peoples R China 4.Guodian Sci & Technol Res Inst, Nanjing 210033, Jiangsu, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhao, Piqi,Li, Qinggang,Yi, Ruiji,et al. Fabrication and microstructure of liquid sintered porous SiC ceramics through spark plasma sintering[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2018,748:36, 43. |
| APA | Zhao, Piqi.,Li, Qinggang.,Yi, Ruiji.,Wang, Zhi.,Lu, Lingchao.,...&Dong, Shaoming.(2018).Fabrication and microstructure of liquid sintered porous SiC ceramics through spark plasma sintering.JOURNAL OF ALLOYS AND COMPOUNDS,748,36. |
| MLA | Zhao, Piqi,et al."Fabrication and microstructure of liquid sintered porous SiC ceramics through spark plasma sintering".JOURNAL OF ALLOYS AND COMPOUNDS 748(2018):36. |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。