Pressureless sintering of titanium carbide doped with boron or boron carbide
文献类型：期刊论文
| 作者 | Gu, Yifeng1,2; Liu, Ji-Xuan3; Xu, Fangfang1; Zhang, Guo-Jun3 |
| 刊名 | Journal of the European Ceramic Society
 |
| 出版日期 | 2017 |
| 卷号 | 37期号:2页码:539-547 |
| ISSN号 | 09552219 |
| DOI | 10.1016/j.jeurceramsoc.2016.08.035 |
| 英文摘要 | Titanium carbide ceramics with different contents of boron or B4C were pressureless sintered at temperatures from 2100 °C to 2300 °C. Due to the removal of oxide impurities, the onset temperature for TiC grain growth was lowered to 2100 °C and near fully dense (>98%) TiC ceramics were obtained at 2200 °C. TiB2platelets and graphite flakes were formed during sintering process. They retard TiC grains from fast growth and reduced the entrapped pores in TiC grains. Therefore, TiC doped with boron or B4C could achieve higher relative density (>99.5%) than pure TiC (96.67%) at 2300 °C. Mechanical properties including Vickers’ hardness, fracture toughness and flexural strength were investigated. Highest fracture toughness (4.79 ± 0.50 MPa m1/2) and flexural strength (552.6 ± 23.1 MPa) have been obtained when TiC mixed with B4C by the mass ratio of 100:5.11. The main toughening mechanisms include crack deflection and pull-out of TiB2platelets. © 2016 Elsevier Ltd |
| 源URL | [http://ir.sic.ac.cn/handle/331005/25408]  |
| 专题 | 中国科学院上海硅酸盐研究所 |
| 作者单位 | 1.The State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Shanghai; 200050, China; 2.University of Chinese Academy of Sciences, Beijing; 100049, China; 3.State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Research Institute of Functional Materials, Donghua University, Shanghai; 201620, China |
| 推荐引用方式 GB/T 7714 | Gu, Yifeng,Liu, Ji-Xuan,Xu, Fangfang,et al. Pressureless sintering of titanium carbide doped with boron or boron carbide[J]. Journal of the European Ceramic Society,2017,37(2):539-547. |
| APA | Gu, Yifeng,Liu, Ji-Xuan,Xu, Fangfang,&Zhang, Guo-Jun.(2017).Pressureless sintering of titanium carbide doped with boron or boron carbide.Journal of the European Ceramic Society,37(2),539-547. |
| MLA | Gu, Yifeng,et al."Pressureless sintering of titanium carbide doped with boron or boron carbide".Journal of the European Ceramic Society 37.2(2017):539-547. |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。