Magnesium potassium phosphate cement prepared by the byproduct of magnesium oxide after producing Li2CO3 from salt lakes
文献类型：期刊论文
| 作者 | Tan, Yongshan1,2; Yu, Hongfa1,3 ; Li, Ying1; Wu, Chengyou1,2; Dong, Jinmei1; Wen, Jing1
|
| 刊名 | CERAMICS INTERNATIONAL
 |
| 出版日期 | 2014-09-01 |
| 卷号 | 40期号:8页码:13543-13551 |
| 关键词 | Boron-containing Magnesium Oxide Calcination Temperature Magnesium Potassium Phosphate Cement Repair Material |
| 文献子类 | Article |
| 英文摘要 | Developing new types of chemically bonded phosphate ceramic materials that are environment-friendly, inexpensive and energy-efficient, has become a central theme today. Therefore, in this study, magnesium potassium phosphate cement (MKPC) was prepared from boron-containing magnesium oxide (B-MgO), a byproduct of the production of Li2CO3 from salt lakes. The properties of B-MgO calcined at various temperatures were investigated by XRD, SEM, LSPA and SNAA. The MKPC specimens were prepared at various calcination temperatures (from 800 degrees C to 1400 degrees C) of B-MgO and with various molar ratios of B-MgO to KH2PO4 or KDP (MIP) ranging from 3 to 6. Compression tests were conducted at various curing ages from 3 h to 28 d. The hydration products and microstructure of the specimens were analyzed by XRD and SEM, respectively. The experimental results demonstrated that the properties of B-MgO, such as the specific surface area, the deformation ratio and the total pore volume decreased with increasing calcination temperature. In addition, the early compressive strength of MKPC specimens decreased with increasing calcination temperature of B-MgO, and the long-term compressive strengths of MPC mortar remained constant with increasing calcination temperature of B-MgO. These results also indicated that cement with a high MIP ratio could have a high early strength. The MKPC specimens prepared by B-MgO calcined at 1000 degrees C and a MIP ratio of 6 exhibited a compressive strength of 35.6 MPa at 3 h, which met the mechanical property requirement of quick-repair materials. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved. |
| WOS关键词 | CHEMICALLY BONDED CERAMICS ; RAPID REPAIR ; MECHANICAL-PROPERTIES ; OXYCHLORIDE CEMENT ; CONCRETE ; RESISTANCE ; SURFACE ; MORTAR ; BINDER |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000340321300117 |
| 源URL | [http://ir.isl.ac.cn/handle/363002/5722]  |
| 专题 | 青海盐湖研究所_青海盐湖研究所知识仓储 青海盐湖研究所_盐湖资源与化学实验室 中国科学院青海盐湖研究所 |
| 作者单位 | 1.Chinese Acad Sci, Qinghai Inst Salt Lakes, Xining 810008, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 3.Nanjing Univ Aeronaut & Astronaut, Dept Civil Engn, Nanjing 210016, Jiangsu, Peoples R China |
| 推荐引用方式 GB/T 7714 | Tan, Yongshan,Yu, Hongfa,Li, Ying,et al. Magnesium potassium phosphate cement prepared by the byproduct of magnesium oxide after producing Li2CO3 from salt lakes[J]. CERAMICS INTERNATIONAL,2014,40(8):13543-13551. |
| APA | Tan, Yongshan,Yu, Hongfa,Li, Ying,Wu, Chengyou,Dong, Jinmei,&Wen, Jing.(2014).Magnesium potassium phosphate cement prepared by the byproduct of magnesium oxide after producing Li2CO3 from salt lakes.CERAMICS INTERNATIONAL,40(8),13543-13551. |
| MLA | Tan, Yongshan,et al."Magnesium potassium phosphate cement prepared by the byproduct of magnesium oxide after producing Li2CO3 from salt lakes".CERAMICS INTERNATIONAL 40.8(2014):13543-13551. |
入库方式： OAI收割
来源：青海盐湖研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。