Pulsed SLM-manufactured AlSi10Mg alloy: Mechanical properties and microstructural effects of designed laser energy densities
文献类型：期刊论文
| 作者 | Wang, Lin-zhi1 ; Wang, Sen1; Hong, Xingfu2
|
| 刊名 | JOURNAL OF MANUFACTURING PROCESSES
 |
| 出版日期 | 2018-10-01 |
| 卷号 | 35页码:492-499 |
| 关键词 | Laser energy density Microstructure Mechanical properties Pulsed selective laser melting AlSi10Mg |
| ISSN号 | 1526-6125 |
| DOI | 10.1016/j.jmapro.2018.09.007 |
| 通讯作者 | Wang, Lin-zhi(wlz@cigit.ac.cn) |
| 英文摘要 | The effects of laser energy densities on microstructures and mechanical properties of AlSi10Mg samples fabricated by pulsed selective laser melting (P-SLM) were studied. Scanning electron microscope, transmission electron microscope, X-ray diffraction, Vickers hardness tester and electronic testing machine were used for analysis and measurement of microstructures, phases and mechanical properties of the samples, respectively. The results show that fine cellular microstructures are composed of alpha-Al, eutectic Si, and secondary Si. Moreover, the microhardness values of the specimens perpendicular to the building directions fluctuate between HV(0.1)110 similar to HV(0.1)130 while those of the specimens along the building directions decrease with increasing building heights. Finally, comparison of the mechanical properties of P-SLM and casting samples were discussed, the better mechanical properties of P-SLM samples were showed than those of the casting samples, which can be attributed to solid solution strengthening, grain refinement strengthening, dislocations strengthening and second-phase strengthening. |
| 资助项目 | National Natural Science Foundation of China (NSFC, China)[51405467] ; Chongqing Research of Application Foundation and Advanced Technology[cstc2016jcyj A0061] |
| WOS研究方向 | Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000448225000050 |
| 出版者 | ELSEVIER SCI LTD |
| 源URL | [http://119.78.100.138/handle/2HOD01W0/6899]  |
| 专题 | 中国科学院重庆绿色智能技术研究院 |
| 通讯作者 | Wang, Lin-zhi |
| 作者单位 | 1.Chinese Acad Sci, Chongqing Inst Green & Intelligent Technol, Chongqing Key Lab Addit Mfg Technol & Syst, Chongqing 400714, Peoples R China 2.China Aerodynam Res & Dev Ctr, Mianyang 621000, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, Lin-zhi,Wang, Sen,Hong, Xingfu. Pulsed SLM-manufactured AlSi10Mg alloy: Mechanical properties and microstructural effects of designed laser energy densities[J]. JOURNAL OF MANUFACTURING PROCESSES,2018,35:492-499. |
| APA | Wang, Lin-zhi,Wang, Sen,&Hong, Xingfu.(2018).Pulsed SLM-manufactured AlSi10Mg alloy: Mechanical properties and microstructural effects of designed laser energy densities.JOURNAL OF MANUFACTURING PROCESSES,35,492-499. |
| MLA | Wang, Lin-zhi,et al."Pulsed SLM-manufactured AlSi10Mg alloy: Mechanical properties and microstructural effects of designed laser energy densities".JOURNAL OF MANUFACTURING PROCESSES 35(2018):492-499. |
入库方式： OAI收割
来源：重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。