The mechanisms of crack propagation from surface 3-D fracture under uniaxial compression
文献类型:会议论文
作者 | Wong, RHC; Huang, ML; Jiao, MR; Tang, CA; Zhu, W |
出版日期 | 2004 |
会议日期 | OCT 20-22, 2003 |
会议地点 | Tohoku Univ, Sendai, JAPAN |
关键词 | 3-D surface flaw PMMA material crack propagation flaw cutting depth |
DOI | 10.4028/www.scientific.net/KEM.261-263.219 |
页码 | 219-224 |
英文摘要 | This paper studies the crack propagation of a three dimensional surface fracture using PMMA material with the changing cutting depth of the flaw V, flaw angle 'a' and flaw length 2c. When the cutting depth V of the flaw is equal or greater than 0.3 of the thickness of specimen, crack propagates much easier and further. For flaw angle agreater than or equal to60degrees and with the flaw length greater than or equal to50% width of specimen, the stress required for crack initiation is lower and the crack extends towards to the free boundary of the specimen in a shell shape form with spalling failure. This study provides the fundamental understanding on failure mechanics of crack propagation from 3-D surface flaws. |
会议录 | ADVANCES IN FRACTURE AND FAILURE PREVENTION, PTS 1 AND 2
![]() |
会议录出版者 | TRANS TECH PUBLICATIONS LTD |
会议录出版地 | ZURICH-UETIKON |
语种 | 英语 |
WOS研究方向 | Materials Science ; Mechanics |
WOS记录号 | WOS:000221573900035 |
源URL | [http://119.78.100.198/handle/2S6PX9GI/4371] ![]() |
专题 | 岩土力学所知识全产出_会议论文 |
作者单位 | Hong Kong Polytech Univ, Civil & Struct Engn Dept ; Chinese Acad Sci, Inst Rock & Soil Mech ; Northeastern Univ, Ctr Rockbursts & Induced Seismic Res ; Shandong Univ, Geotech & Struct Engn Res Ctr |
推荐引用方式 GB/T 7714 | Wong, RHC,Huang, ML,Jiao, MR,et al. The mechanisms of crack propagation from surface 3-D fracture under uniaxial compression[C]. 见:. Tohoku Univ, Sendai, JAPAN. OCT 20-22, 2003. |
入库方式: OAI收割
来源:武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。