Research on micro-seismic source location during linear excavation process of deep tunnel
文献类型:会议论文
作者 | Li, Q. P.; Chen, B. R. |
出版日期 | 2013 |
会议日期 | JUN 18-20, 2013 |
会议地点 | Tongji Univ, Shanghai, PEOPLES R CHINA |
关键词 | rock mechanics deep tunnel micro-seismic source location initial value |
页码 | 675-680 |
英文摘要 | The micro-seismic monitoring work during linear excavation process of deep tunnel has the following characteristics: many working faces are constructed simultaneously; the sensor arrays are located in the rear of the working face; the vertical direction coordinate gap of all sensors is small. Due to the above characteristics, traditional Geiger's location method cannot work out stable solution. With the micro-seismic monitoring work of Jinping II hydropower station, this article forms Newton second order method and Newton downhill method to improve former method. The rock-burst location results with three methods are proposed and their calculation abilities are compared. The results show that computational accuracy of the second method is influenced by initial value and the third method has the global convergence; At last, the last two methods together are adopted for source location of five rock-bursts. The conclusion indicates that that improves the accuracy and stability of algorithm convergence. |
源文献作者 | Feng, XT ; Hudson, JA ; Tan, F |
会议录 | ROCK CHARACTERISATION, MODELLING AND ENGINEERING DESIGN METHODS
![]() |
会议录出版者 | CRC PRESS-TAYLOR & FRANCIS GROUP |
会议录出版地 | BOCA RATON |
语种 | 英语 |
WOS研究方向 | Engineering |
WOS记录号 | WOS:000342685900116 |
源URL | [http://119.78.100.198/handle/2S6PX9GI/4766] ![]() |
专题 | 岩土力学所知识全产出_会议论文 国家重点实验室知识产出_会议论文 |
作者单位 | Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn |
推荐引用方式 GB/T 7714 | Li, Q. P.,Chen, B. R.. Research on micro-seismic source location during linear excavation process of deep tunnel[C]. 见:. Tongji Univ, Shanghai, PEOPLES R CHINA. JUN 18-20, 2013. |
入库方式: OAI收割
来源:武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。