二甲醚燃烧过程中甲醛生成及排放特性的实验研究
文献类型:学位论文
; | |
作者 | 曾涛 |
学位类别 | 硕士 |
答辩日期 | 2007-06-09 |
授予单位 | 中国科学院广州能源研究所 |
授予地点 | 广州能源研究所 |
导师 | 赵黛青 |
关键词 | 二甲醚 燃烧 甲醛测量方法 甲醛排放 |
其他题名 | Experimental Study on Formaldehyde form and emission characteristics of DME combustion |
中文摘要 | Dimethyl ether (DME) is a promising alternative fuel, and it is friendly to the environment because of it’s little emissions of conventional pollutants. But when combusted DME,it will produce the aldehydes which are toxic to human being and animals. Formaldehyde form and emission characteristics of DME combustion are experimentally investigated in this paper. Based on the GB acetyl acetone spectrophotometry technology, the method used to measure formaldehyde concentration of DME combustion exhaust gas is improved. By analyzing and controlling the important factors at key steps of this method, The experimental result indicated that formaldehyde was a very important intermediate product in DME flames, and it was generated and consumed near the flame front with very high concentration. the emission concentration of formaldehyde in the DME combustion process is over 10 times than that of methane. Therefore, formaldehyde emission in DME combustion process can not be ignored.Formaldehyde concentration increased when fuel equivalence ratio increased. At the same fuel equivalence ratio, higher flame temperature caused higher formaldehyde concentration. |
语种 | 中文 |
公开日期 | 2011-07-10 ; 2011-07-15 |
页码 | 53 |
源URL | [http://ir.giec.ac.cn/handle/344007/4005] ![]() |
专题 | 中国科学院广州能源研究所 |
推荐引用方式 GB/T 7714 | 曾涛. 二甲醚燃烧过程中甲醛生成及排放特性的实验研究, Experimental Study on Formaldehyde form and emission characteristics of DME combustion[D]. 广州能源研究所. 中国科学院广州能源研究所. 2007. |
入库方式: OAI收割
来源:广州能源研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。