Common readout subsystem for the belle ii experiment and its performance measurement
文献类型：期刊论文
| 作者 | Yamada, Satoru1; Itoh, Ryosuke1; Konno, Tomoyuki1; Liu, Zhen'an2; Nakao, Mikihiko1; Suzuki, Soh Y.1; Zhao, Jingzhou2 |
| 刊名 | Ieee transactions on nuclear science
 |
| 出版日期 | 2017-06-01 |
| 卷号 | 64期号:6页码:1415-1419 |
| ISSN号 | 0018-9499 |
| 关键词 | Belle ii Data acquisition (daq) |
| DOI | 10.1109/tns.2017.2693297 |
| 通讯作者 | Yamada, satoru(satoru.yamada@kek.jp) |
| 英文摘要 | The belle ii experiment is the major upgrade of the belle experiment, which verified kobayashi-maskawa mechanism to explain the violation of charge and parity symmetry in the standard model. the belle ii experiment will focus on a search for physics beyond the standard model with the upgraded high-luminosity electron-positron collider, superkekb at kek. the readout subsystem of the belle ii data-acquisition system needs to receive a large amount of data from different frontend electronics (fees) of several subdetectors and process and send the data to a high-level trigger system which performs event-rate reduction. the common readout subsystem for the belle ii experiment was developed for all subdetectors except for the innermost pixel detector. the subsystem consists of readout boards with high-speed serial links and readout pc servers. in the belle ii experiment, once event building is performed, events are distributed over processor nodes, which can be scaled up rather easily during the experimental period. for the readout subsystem before the event builder, however, that event-based parallel processing is impossible. therefore, the performance of the readout subsystem should be checked carefully before the experiment starts. to check the performance of the readout subsystem, we performed a stress test with dummy data produced by field-programmable gate array on fees and readout boards. we used one unit of the readout subsystem for the test, which consists of one pc server and several readout boards. in this test, the system achieved to handle the target event rate of 30 khz with loss of very few events. the readout test with some of the belle ii subdetectors was also performed in cosmicray tests measurements. the readout subsystem worked stably and the basic functionality was tested with real data from the subdetectors. |
| WOS关键词 | DATA-ACQUISITION SYSTEM ; TRIGGER ; FLOW |
| WOS研究方向 | Engineering ; Nuclear Science & Technology |
| WOS类目 | Engineering, Electrical & Electronic ; Nuclear Science & Technology |
| 语种 | 英语 |
| 出版者 | IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC |
| WOS记录号 | WOS:000404973000034 |
| URI标识 | http://www.irgrid.ac.cn/handle/1471x/2177251 |
| 专题 | 高能物理研究所 |
| 通讯作者 | Yamada, Satoru |
| 作者单位 | 1.High Energy Accelerator Res Org KEK, Tsukuba, Ibaraki 3050801, Japan 2.Chinese Acad Sci, Inst High Energy Phys, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yamada, Satoru,Itoh, Ryosuke,Konno, Tomoyuki,et al. Common readout subsystem for the belle ii experiment and its performance measurement[J]. Ieee transactions on nuclear science,2017,64(6):1415-1419. |
| APA | Yamada, Satoru.,Itoh, Ryosuke.,Konno, Tomoyuki.,Liu, Zhen'an.,Nakao, Mikihiko.,...&Zhao, Jingzhou.(2017).Common readout subsystem for the belle ii experiment and its performance measurement.Ieee transactions on nuclear science,64(6),1415-1419. |
| MLA | Yamada, Satoru,et al."Common readout subsystem for the belle ii experiment and its performance measurement".Ieee transactions on nuclear science 64.6(2017):1415-1419. |
入库方式： iSwitch采集
来源：高能物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。