Material Based Structure Design: Numerical Analysis Thermodynamic Response of Thermal Pyrolytic Graphite /Al Sandwich Composites
文献类型：期刊论文
| 作者 | Wang, Junxia1,2; Yan, Shilin3; Yu, Dingshan1 |
| 刊名 | APPLIED COMPOSITE MATERIALS
 |
| 出版日期 | 2016-12-01 |
| 卷号 | 23期号:6页码:1167-1176 |
| 关键词 | Finite Element Simulation Thermodynamic Response Temperature Distribution Thermal Stress Structural Optimization |
| DOI | 10.1007/s10443-016-9506-3 |
| 文献子类 | Article |
| 英文摘要 | Amine-grafted multiwalled carbon nanotubes (MWCNTs) based thermally conductive adhesive (TCA) was studied in the previous paper and applied here in thermal pyrolytic graphite (TPG)/Al radiator due to its high thermal conductivity, toughness and cohesiveness. In this paper, in an attempt to confirm the application of TCA to TPG/Al sandwich radiator, the thermodynamic response in TPG/Al sandwich composites associated with key material properties and structural design was investigated using finite element simulation with commercial available ANSYS software. The induced thermal stress in TCA layer is substantial due to the thermal expansion mismatch between Al plate and TPG. The maximum thermal stress is located near the edge of TCA layer with the von Mises stress value of 4.02 MPa and the shear stress value of 1.66 MPa. The reasonable adjustment of physical-mechanical properties including thermal conductivity, thermal expansion, Young(,)s modulus and the thickness of TCA layer, Al plate and TPG are beneficial for reducing the temperature of the top surface of the upper skin and their effects on the reduction of thermal structural response in some ways. These findings will highlight the structural optimization of TPG/Al radiator for future application. |
| WOS关键词 | FINITE-ELEMENT SIMULATION ; WALLED CARBON NANOTUBES ; CONDUCTIVE ADHESIVE ; IMPACT RESPONSE ; STRESS ; BEHAVIOR ; PREDICTION ; EXPANSION |
| 语种 | 英语 |
| WOS记录号 | WOS:000389199900005 |
| 资助机构 | Natural Science Foundation of Guangdong Province(2015 A030310501) ; Open Fund of Jiangsu Key Laboratory of Materials and Technology for Energy Conversion(MTEC-2015 M01) |
| 源URL | [http://ir.giec.ac.cn/handle/344007/14005]  |
| 专题 | 中国科学院广州能源研究所 |
| 作者单位 | 1.Sun Yat Sen Univ, Sch Chem & Chem Engn, Guangzhou 510275, Guangdong, Peoples R China 2.Chinese Acad Sci, Guangzhou Inst Energy Convers, Guangdong Key Lab New & Renewable Energy Res & De, Guangzhou 510640, Guangdong, Peoples R China 3.Wuhan Univ Technol, Sch Sci, Wuhan 430070, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, Junxia,Yan, Shilin,Yu, Dingshan. Material Based Structure Design: Numerical Analysis Thermodynamic Response of Thermal Pyrolytic Graphite /Al Sandwich Composites[J]. APPLIED COMPOSITE MATERIALS,2016,23(6):1167-1176. |
| APA | Wang, Junxia,Yan, Shilin,&Yu, Dingshan.(2016).Material Based Structure Design: Numerical Analysis Thermodynamic Response of Thermal Pyrolytic Graphite /Al Sandwich Composites.APPLIED COMPOSITE MATERIALS,23(6),1167-1176. |
| MLA | Wang, Junxia,et al."Material Based Structure Design: Numerical Analysis Thermodynamic Response of Thermal Pyrolytic Graphite /Al Sandwich Composites".APPLIED COMPOSITE MATERIALS 23.6(2016):1167-1176. |
入库方式： OAI收割
来源：广州能源研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。