Solids surface characterization using computational algorithms: A case study for talc fillers
文献类型：期刊论文
| 作者 | Yao, Zhitong1; Wu, Daidai2; Heng, Jerry Y. Y.3; Wu, Weihong1; Zhao, Hongting1; Liu, Jie1; Tang, Junhong1 |
| 刊名 | APPLIED CLAY SCIENCE
 |
| 出版日期 | 2017-06-01 |
| 卷号 | 141页码:212-218 |
| 关键词 | Talc Filler Surface Property Polymer Computational Algorithm |
| DOI | 10.1016/j.clay.2017.02.027 |
| 文献子类 | Article |
| 英文摘要 | The solid surface characterization using contact angle measurement is complicated and time-consuming. In this work, two computational algorithms in MATLAB and C were developed and validated by the surface properties determination of talc filler (TCF) and colored talc filler (CTCF). The results indicated that, the surface free energy parameters calculated using the two algorithms for both samples were consistent. As compared to the MATLAB function, the assembly statements of C function were longer, although the unknowns can be directly obtained using this toolbox. The gamma(D)(S) values determined by the Owens-Wendt-Kaelble (OWK), van Oss-Chaudhury-Good (vOCG) and Wu methods were consistent and contributed a major part of the gamma(T)(s)Compared to gamma(D)(S), the gamma(SP)(s) component contributed less toys implying a lower polarity for both samples. The lower y(S)(D) and gamma(SP)(S) for CTCF added up to a lower gamma(T)(S) value, which could reduce filler particle-particle interactions. The mechanical properties study of acrylonitrile-butadiene-styrene (ABS) matrix filled with the two fillers showed that the incorporation of them played mainly a reinforcing role, and a better performance for CTCF was observed. (C) 2017 Elsevier B.V. All rights reserved. |
| WOS关键词 | INVERSE GAS-CHROMATOGRAPHY ; CONTACT-ANGLE ; FREE-ENERGY ; TENSION ; POLYMERS ; SYSTEMS ; POWDERS |
| 语种 | 英语 |
| WOS记录号 | WOS:000399846400025 |
| 资助机构 | National Natural Science Foundation of China(51606055 ; Zhejiang Provincial Natural Science Foundation of China(LY14D010009) ; 41271249) |
| 源URL | [http://ir.giec.ac.cn/handle/344007/14172]  |
| 专题 | 中国科学院广州能源研究所 |
| 作者单位 | 1.Hangzhou Dianzi Univ, Coll Mat Sci & Environm Engn, Hangzhou 310018, Zhejiang, Peoples R China 2.Chinese Acad Sci, GuangZhou Inst Energy Convers, Guangzhou 510640, Guangdong, Peoples R China 3.Imperial Coll London, Dept Chem Engn, South Kensington Campus, London SW7 2AZ, England |
| 推荐引用方式 GB/T 7714 | Yao, Zhitong,Wu, Daidai,Heng, Jerry Y. Y.,et al. Solids surface characterization using computational algorithms: A case study for talc fillers[J]. APPLIED CLAY SCIENCE,2017,141:212-218. |
| APA | Yao, Zhitong.,Wu, Daidai.,Heng, Jerry Y. Y..,Wu, Weihong.,Zhao, Hongting.,...&Tang, Junhong.(2017).Solids surface characterization using computational algorithms: A case study for talc fillers.APPLIED CLAY SCIENCE,141,212-218. |
| MLA | Yao, Zhitong,et al."Solids surface characterization using computational algorithms: A case study for talc fillers".APPLIED CLAY SCIENCE 141(2017):212-218. |
入库方式： OAI收割
来源：广州能源研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。