A highly efficient polyampholyte hydrogel sorbent based fixed-bed process for heavy metal removal in actual industrial effluent
文献类型：期刊论文
| 作者 | Zhou, Guiyin; Luo, Jinming; Liu, Chengbin; Chu, Lin; Ma, Jianhong; Tang, Yanhong; Zeng, Zebing; Luo, Shenglian |
| 刊名 | WATER RESEARCH
 |
| 出版日期 | 2016-02-01 |
| 卷号 | 89期号:0页码:151-160 |
| 关键词 | Polyampholyte Hydrogel Heavy Metal Removal Actual Wastewater Fixed-bed Process Treatment Capacity |
| DOI | 10.1016/j.watres.2015.11.053 |
| 英文摘要 | High sorption capacity, high sorption rate, and fast separation and regeneration for qualified sorbents used in removing heavy metals from wastewater are urgently needed. In this study, a polyampholyte hydrogel was well designed and prepared via a simple radical polymerization procedure. Due to the remarkable mechanical strength, the three-dimensional polyampholyte hydrogel could be fast separated, easily regenerated and highly reused. The sorption capacities were as high as 216.1 mg/g for Pb(II) and 153.8 mg/g for Cd(II) owing to the existence of the large number of active groups. The adsorption could be conducted in a wide pH range of 3-6 and the equilibrium fast reached in 30 min due to its excellent water penetration for highly accessible to metal ions. The fixed-bed column sorption results indicated that the polyampholyte hydrogel was particularly effective in removing Pb(II) and Cd(II) from actual industrial effluent to meet the regulatory requirements. The treatment volumes of actual smelting effluent using one fixed bed column were as high as 684 bed volumes (BV) (7736 mL) for Pb(II) and 200 BV (2262 mL) for Cd(II). Furthermore, the treatment volumes of actual smelting effluent using tandem three columns reached 924 BV (31,351 mL) for Pb(II) and 250 BV (8483 mL) for Cd(II), producing only 4 BV (136 mL) eluent. Compared with the traditional high density slurry (HDS) process with large amount of sludge, the proposed process would be expected to produce only a small amount of sludge. When the treatment volume was controlled below 209.3 BV (7103 mL), all metal ions in the actual industrial effluent could be effectively removed (<0.01 mg/L). This wok develops a highly practical process based on polyampholyte hydrogel sorbents for the removal of heavy metal ions from practical wastewater. (C) 2015 Elsevier Ltd. All rights reserved. |
| 源URL | [http://ir.rcees.ac.cn/handle/311016/36151]  |
| 专题 | 生态环境研究中心_中国科学院饮用水科学与技术重点实验室 |
| 推荐引用方式 GB/T 7714 | Zhou, Guiyin,Luo, Jinming,Liu, Chengbin,et al. A highly efficient polyampholyte hydrogel sorbent based fixed-bed process for heavy metal removal in actual industrial effluent[J]. WATER RESEARCH,2016,89(0):151-160. |
| APA | Zhou, Guiyin.,Luo, Jinming.,Liu, Chengbin.,Chu, Lin.,Ma, Jianhong.,...&Luo, Shenglian.(2016).A highly efficient polyampholyte hydrogel sorbent based fixed-bed process for heavy metal removal in actual industrial effluent.WATER RESEARCH,89(0),151-160. |
| MLA | Zhou, Guiyin,et al."A highly efficient polyampholyte hydrogel sorbent based fixed-bed process for heavy metal removal in actual industrial effluent".WATER RESEARCH 89.0(2016):151-160. |
入库方式： OAI收割
来源：生态环境研究中心
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。