Can Signal-to-Noise Ratio Perform as a Baseline Indicator for Medical Image Quality Assessment
文献类型：期刊论文
| 作者 | SHAODE YU; LEIDA LI; YAOQIN XIE1; ZHICHENG ZHANG; GUANGZHE DAI; XIAOKUN LIANG |
| 刊名 | IEEE Access
 |
| 出版日期 | 2018 |
| 文献子类 | 期刊论文 |
| 英文摘要 | Natural image quality assessment (NIQA) wins increasing attention, while NIQA models are rarely used in the medical community. A couple of studies employ the NIQA methodologies for medical image quality assessment (MIQA), but building the benchmark data sets necessitates considerable time and professional skills. In particular, the characteristics of synthesized distortions are different from those of clinical distortions, which make the results not so convincing. In clinic, signal-to-noise ratio (SNR) is widely used, which is de ned as the quotient of the mean signal intensity measured in a tissue region of interest (ROI) and the standard deviation of the signal intensity in an air region outside the imaged object, and both regions are outlined by specialists. We take advantage of the knowledge that SNR is routinely used and concern whether SNR measure can perform as a baseline metric for the development of MIQA algorithms. To address the issue, the inter-observer reliability of SNR measure is investigated regarding to different tissue ROIs [white matter (WM); cerebral spinal uid (CSF)] in magnetic resonance (MR) images. A total of 192 T 2, 88 T1, 76 T2 and 55 contrast-enhanced T1 (T1C) weighted images are analyzed. Statistical analysis indicates that SNR values show consistency between different observers to the same ROI in each modality (Wilcoxon rank sum test, pw 0:11; and paired sample t-test, pp 0:28). Moreover, whether off-the-shelf NIQA models can predict MR image quality is considered by using SNR values as the reference scores. Four NIQA models (BIQI, BLIINDS-II, BRISQUE, and NIQE) are evaluated, and the correlation between SNR values and NIQA results is evaluated. Pearson correlation coef cient (rp) shows that WM-based SNR values correlates well with BIQI, BLIINDS-II and BRISQUE in T 2 images (rp 0:77), BRISQUE and NIQE in T1 images (rp 0:75), BLIINDS-II in T2 images (rp 0:67), and BRISQUE and NIQE in T1C images (rp 0:58), while CSF-based SNR values correlates well with BLIINDS-II in T 2 images (rp 0:64) and T2 images (rp 0:60), and all pp < 10 4. The prediction performance analysis further proves the result from the correlation analysis. Conclusively, SNR measure is reliable to different observations and can perform as a baseline indicator for the development of MIQA algorithms. In general, BRISQUE and BLIINDS-II are full of potential to be conditionally used as objective MIQA models toward human brain MR images. This paper presents the rst attempt of using SNR measure to bridge the gap between NIQA and MIQA, and large-scale experiments should be further conducted to con rm the conclusion in this paper. |
| URL标识 | 查看原文 |
| 语种 | 英语 |
| 源URL | [http://ir.siat.ac.cn:8080/handle/172644/14242]  |
| 专题 | 深圳先进技术研究院_医工所 |
| 推荐引用方式 GB/T 7714 | SHAODE YU,LEIDA LI,YAOQIN XIE1,et al. Can Signal-to-Noise Ratio Perform as a Baseline Indicator for Medical Image Quality Assessment[J]. IEEE Access,2018. |
| APA | SHAODE YU,LEIDA LI,YAOQIN XIE1,ZHICHENG ZHANG,GUANGZHE DAI,&XIAOKUN LIANG.(2018).Can Signal-to-Noise Ratio Perform as a Baseline Indicator for Medical Image Quality Assessment.IEEE Access. |
| MLA | SHAODE YU,et al."Can Signal-to-Noise Ratio Perform as a Baseline Indicator for Medical Image Quality Assessment".IEEE Access (2018). |
入库方式： OAI收割
来源：深圳先进技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。