Ultrahigh temperature processing by concentrated solar energy with accurate temperature measurement
文献类型：期刊论文
| 作者 | Jin, Jian1,2; Liu, Mingkai1,2; Lin, Pengzhu3; Fu, Tairan4; Hao, Yong1,2; Jin, Hongguang1,2 |
| 刊名 | Applied thermal engineering
 |
| 出版日期 | 2019-03-05 |
| 卷号 | 150页码:1337-1344 |
| ISSN号 | 1359-4311 |
| 关键词 | Concentrated solar energy Refractory material Melting point Ultrahigh temperature Measurement |
| DOI | 10.1016/j.applthermaleng.2018.10.002 |
| 通讯作者 | Fu, tairan(trfu@mail.tsinghua.edu.cn) ; Hao, yong(haoyong@iet.cn) |
| 英文摘要 | An ultrahigh temperature solar processing platform consisting of a high-flux solar simulator (hfss) and auxiliary equipments is developed to research high-temperature materials and processes. refractory metals of zirconium (melting point of 1855 degrees c), niobium (2477 degrees c) and tantalum (3017 degrees c) were successfully melted by concentrated light from xenon lamps of the hfss. the melting experiment was monitored by a charge-coupled device camera, and the temperature was recorded by a near-infrared multi-wavelength pyrometer. then the processed metals were examined by sem and eds to compare the difference before and after the ultrahigh-temperature experiments. in addition, a numerical model combining monte-carlo ray-tracing method and finite-element method was established to simulate the melting process, the results of which agreed well with experimental results. furthermore, melting temperatures measured by the well-calibrated near-infrared multi wavelength pyrometer were close to the melting points of the refractory metals (i.e., +/- 2% relative error). the experimental platform also demonstrates the capability of providing high radiative flux and ultrahigh temperatures (> 2000 degrees c) for the calibration of heat flux gauges and the testing of high-temperature properties of materials. the concentrated solar energy based ultrahigh temperature technology provides an innovative approach for processing refractory materials in general. |
| WOS关键词 | SIMULATOR ; CERAMICS ; TITANIUM ; FURNACE ; COMPOSITES ; CARBIDE ; HAFNIUM ; DESIGN ; ALLOY ; BEAM |
| WOS研究方向 | Thermodynamics ; Energy & Fuels ; Engineering ; Mechanics |
| WOS类目 | Thermodynamics ; Energy & Fuels ; Engineering, Mechanical ; Mechanics |
| 语种 | 英语 |
| 出版者 | PERGAMON-ELSEVIER SCIENCE LTD |
| WOS记录号 | WOS:000462418200118 |
| URI标识 | http://www.irgrid.ac.cn/handle/1471x/2373503 |
| 专题 | 工程热物理研究所 |
| 通讯作者 | Fu, Tairan; Hao, Yong |
| 作者单位 | 1.Chinese Acad Sci, Inst Engn Thermophys, 11 Beisihuanzi Rd, Beijing 100190, Peoples R China 2.Univ Chinese Acad Sci, 19A Yuquan Rd, Beijing 100049, Peoples R China 3.Huazhong Univ Sci & Technol, Sch Energy & Power Engn, 1037 Luoyu Rd, Wuhan 430074, Hubei, Peoples R China 4.Tsinghua Univ, Dept Energy & Power Engn, Key Lab Utilizat & Reduct Technol CO2, Key Lab Thermal Sci & Power Engn,Minist Educ, Beijing 100084, Peoples R China |
| 推荐引用方式 GB/T 7714 | Jin, Jian,Liu, Mingkai,Lin, Pengzhu,et al. Ultrahigh temperature processing by concentrated solar energy with accurate temperature measurement[J]. Applied thermal engineering,2019,150:1337-1344. |
| APA | Jin, Jian,Liu, Mingkai,Lin, Pengzhu,Fu, Tairan,Hao, Yong,&Jin, Hongguang.(2019).Ultrahigh temperature processing by concentrated solar energy with accurate temperature measurement.Applied thermal engineering,150,1337-1344. |
| MLA | Jin, Jian,et al."Ultrahigh temperature processing by concentrated solar energy with accurate temperature measurement".Applied thermal engineering 150(2019):1337-1344. |
入库方式： iSwitch采集
来源：工程热物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。