中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
2,3,3,4-oxydiphthalic dianhydride-based phenylethynyl-terminated imide oligomers for low-temperature resin transfer molding applications

文献类型:期刊论文

作者Meng, Xiangsheng1,2; Zheng, Yan3; Yan, Jingling1; Li, Yunhui3; Wang, Zhen4; Li, Guodong5
刊名High performance polymers
出版日期2016-10-01
卷号28期号:8页码:962-970
关键词Resin transfer molding Phenylethynyl endcapped imide oligomers Stable melt viscosity High-temperature polymers 2 3 3 4-oxydiphthalic dianhydride
ISSN号0954-0083
DOI10.1177/0954008315611470
通讯作者Wang, zhen(wangzhen@ciac.ac.cn)
英文摘要A series of imide resins were prepared using 2,3,3,4-oxydiphthalic dianhydride, 4-phenylethynylphthalic anhydride, and aromatic diamines (1, 3-bis(3-aminophenoxy), 3,4-oxyaniline, 2,2-bis (trifluoromethyl) benzidine, and m-phenylenediamine) as starting materials. these imide oligomers were characterized by means of fourier transform infrared spectroscopy, differential scanning calorimetry, intrinsic viscosity measurements, and rheological measurements. some of these oligomers exhibited low (<1 pas at 250 degrees c) and stable (>2 h at 250 degrees c) melt viscosity, which was highly desirable for resin transfer molding process. thermosetting polyimides (pis) were then produced from these oligomers via thermal cross-linking reaction of phenylethynyl group. the properties of the thermosets were studied using tensile and flexural testing, dynamic mechanical thermal analysis, and thermogravimetric analysis. the cured pis exhibited a good combination of thermal and mechanical properties, with a tensile strength of 31-76 mpa, flexural strength of 38-142 mpa, glass transition temperatures of 233-358 degrees c, and 5% weight loss temperatures of 540-545 degrees c under nitrogen atmosphere.
WOS关键词2,3,3',4'-BIPHENYLTETRACARBOXYLIC DIANHYDRIDE ; ADHESIVE PROPERTIES ; POLYIMIDES ; COMPOSITES ; DESIGN
WOS研究方向Polymer Science
WOS类目Polymer Science
语种英语
WOS记录号WOS:000385951200009
出版者SAGE PUBLICATIONS LTD
URI标识http://www.irgrid.ac.cn/handle/1471x/2374780
专题中国科学院大学
通讯作者Wang, Zhen
作者单位1.Chinese Acad Sci, Changchun Inst Appl Chem, Polymer Composites Engn Lab, Changchun, Jilin, Peoples R China
2.Univ Chinese Acad Sci, Beijing, Peoples R China
3.Changchun Univ Sci & Technol, Sch Chem & Environm Engn, Changchun, Jilin, Peoples R China
4.Chinese Acad Sci, Changchun Inst Appl Chem, State Key Lab Polymer Phys & Chem, 5625 Renmin St, Changchun 130022, Jilin, Peoples R China
5.Jilin Univ, Coll Chem, Changchun, Jilin, Peoples R China
推荐引用方式
GB/T 7714
Meng, Xiangsheng,Zheng, Yan,Yan, Jingling,et al. 2,3,3,4-oxydiphthalic dianhydride-based phenylethynyl-terminated imide oligomers for low-temperature resin transfer molding applications[J]. High performance polymers,2016,28(8):962-970.
APA Meng, Xiangsheng,Zheng, Yan,Yan, Jingling,Li, Yunhui,Wang, Zhen,&Li, Guodong.(2016).2,3,3,4-oxydiphthalic dianhydride-based phenylethynyl-terminated imide oligomers for low-temperature resin transfer molding applications.High performance polymers,28(8),962-970.
MLA Meng, Xiangsheng,et al."2,3,3,4-oxydiphthalic dianhydride-based phenylethynyl-terminated imide oligomers for low-temperature resin transfer molding applications".High performance polymers 28.8(2016):962-970.

入库方式: iSwitch采集

来源:中国科学院大学

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。