A study on attapulgite reinforced pa6 composites
文献类型：期刊论文
| 作者 | Pan, BL; Yue, QF; Ren, JF; Wang, HG; Jian, LQ; Zhang, JY; Yang, SR |
| 刊名 | Polymer testing
 |
| 出版日期 | 2006-05-01 |
| 卷号 | 25期号:3页码:384-391 |
| 关键词 | Attapulgite Pa6 Polymer matrix composite Crystallization Orientation |
| ISSN号 | 0142-9418 |
| DOI | 10.1016/j.polymertesting.2005.11.012 |
| 通讯作者 | Pan, bl(pblhust@163.com) |
| 英文摘要 | Attapulgite (atb)/pa6 (polyamide 6) composites with different atb contents have been prepared by the melt compounding approach using a brabender twin-screw extruder. mechanical investigation (by tensile test and bending test) showed that yield strength reaches a maximum value with incorporation of 4 wt% atb for the tensile test and with incorporation of 2 wt% atb for the bending test. scanning electron microscopy (sem) observation on the fracture surfaces of the composites showed that a uniform dispersion of atb is obtained. dynamic mechanical analysis and the results of differential scanning calorimetry (dsc) reflected that there are strong interactions between atb and pa6. sem photographs of the fracture surface at different angles showed that the bundles of rod shaped crystals of atb may orient along with the direction of melt flow during injection molding. x-ray diffraction (xrd) measurements suggested that the inclusion of atb into pa6 matrix hardly changes the crystalline structures of both atb and pa6. however, crystallite size of gamma-form pa6 in pa6/atb composites becomes much larger. furthermore, the content of alpha-form pa6 gradually increases while the content of gamma-form gradually decreases from surface to core for the injection molding samples. (c) 2006 elsevier ltd. all rights reserved. |
| WOS关键词 | LAYERED SILICATE NANOCOMPOSITES ; POLYPROPYLENE/ATTAPULGITE NANOCOMPOSITES ; MECHANICAL-PROPERTIES ; CRYSTALLIZATION BEHAVIOR ; MORPHOLOGY ; POLYOXYMETHYLENE ; POLYMERIZATION ; KINETICS |
| WOS研究方向 | Materials Science ; Polymer Science |
| WOS类目 | Materials Science, Characterization & Testing ; Polymer Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000237686900016 |
| 出版者 | ELSEVIER SCI LTD |
| URI标识 | http://www.irgrid.ac.cn/handle/1471x/2378934 |
| 专题 | 中国科学院大学 |
| 通讯作者 | Pan, BL |
| 作者单位 | 1.Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China 2.Chinese Acad Sci, Grad Sch, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Pan, BL,Yue, QF,Ren, JF,et al. A study on attapulgite reinforced pa6 composites[J]. Polymer testing,2006,25(3):384-391. |
| APA | Pan, BL.,Yue, QF.,Ren, JF.,Wang, HG.,Jian, LQ.,...&Yang, SR.(2006).A study on attapulgite reinforced pa6 composites.Polymer testing,25(3),384-391. |
| MLA | Pan, BL,et al."A study on attapulgite reinforced pa6 composites".Polymer testing 25.3(2006):384-391. |
入库方式： iSwitch采集
来源：中国科学院大学
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。