The effects of bonding temperature, pressure and holding time on the shear strength of diffusion bonded ti3sic2/ni joints
文献类型:期刊论文
作者 | Yin Xiaohui; Li Meishuan; Wang Yang; Zhou Yanchun |
刊名 | Rare metal materials and engineering
![]() |
出版日期 | 2007-08-01 |
卷号 | 36页码:461-464 |
关键词 | Ti3sic2 Ni Diffusion bond Shear strength |
ISSN号 | 1002-185X |
通讯作者 | Li meishuan(mshli@imr.ac.en) |
英文摘要 | Diffusion bonding of ti3sic2 and nickel has been conducted at temperatures of 800 similar to 1100 degrees c for 10 similar to 90 min under 6 similar to 20 mpa in vacuum. the effects of bonding temperature, bonding pressure and holding time were studied by orthogonal experiments. joints strengths were determined through shear test. the results demonstrated that the maximum shear strength of (121 +/- 7) mpa, which is close to the shear strength of ti3sic2, has been obtained in the condition of 1000 degrees c for 10 min under 20 mpa. |
WOS关键词 | BULK CERAMICS ; MICROSTRUCTURE |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS类目 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
WOS记录号 | WOS:000250915200133 |
出版者 | NORTHWEST INST NONFERROUS METAL RESEARCH |
URI标识 | http://www.irgrid.ac.cn/handle/1471x/2380005 |
专题 | 中国科学院大学 |
通讯作者 | Li Meishuan |
作者单位 | 1.Chinese Acad Sci, Met Res Inst, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 2.Chinese Acad Sci, Grad Sch, Beijing 100039, Peoples R China |
推荐引用方式 GB/T 7714 | Yin Xiaohui,Li Meishuan,Wang Yang,et al. The effects of bonding temperature, pressure and holding time on the shear strength of diffusion bonded ti3sic2/ni joints[J]. Rare metal materials and engineering,2007,36:461-464. |
APA | Yin Xiaohui,Li Meishuan,Wang Yang,&Zhou Yanchun.(2007).The effects of bonding temperature, pressure and holding time on the shear strength of diffusion bonded ti3sic2/ni joints.Rare metal materials and engineering,36,461-464. |
MLA | Yin Xiaohui,et al."The effects of bonding temperature, pressure and holding time on the shear strength of diffusion bonded ti3sic2/ni joints".Rare metal materials and engineering 36(2007):461-464. |
入库方式: iSwitch采集
来源:中国科学院大学
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。