In-situ fabrication of sic-tic-ti3sic2 composites by spark plasma sintering
文献类型：期刊论文
| 作者 | Zhang Jianfeng; Wang Lianjun; Jiang Wan; Chen Lidong; Wu Ting |
| 刊名 | Rare metal materials and engineering
 |
| 出版日期 | 2007-08-01 |
| 卷号 | 36页码:816-818 |
| ISSN号 | 1002-185X |
| 关键词 | In-situ synthesis Sic-tic-ti3sic2 Spark plasma sintering |
| 通讯作者 | Zhang jianfeng() |
| 英文摘要 | Using ti, si, c and a small quantity of al as starting materials, sic-tic-ti3sic2 composites without tic were fabricated sintered at 1350 degrees c by spark plasma sintering (sps). the sic volume content of the composite was 50%, its open porosity was 2.72%, vickers hardness was about 10.09 gpa, and fracture toughness 5.66 mpa center dot m(1/2). but when the sintering temperature was increased to 1450 degrees c, xrd results showed that tic appeared, which indicated that ti3sic2 decomposed. the open porosity was only 0.64%, the vickers hardness increased to 18.07 gpa, and fracture toughness was 6.30 mpa center dot m(1/2). the experimental results indicate that only by increasing the sintering temperature from 1350 to 1450 degrees c, ti3sic2 decomposes partly to tic, which could increase the general properties of the composites. |
| WOS关键词 | TI3SIC2 |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS类目 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | NORTHWEST INST NONFERROUS METAL RESEARCH |
| WOS记录号 | WOS:000249866900230 |
| URI标识 | http://www.irgrid.ac.cn/handle/1471x/2382711 |
| 专题 | 中国科学院大学 |
| 通讯作者 | Zhang Jianfeng |
| 作者单位 | 1.Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China 2.Chinese Acad Sci, Grad Sch, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang Jianfeng,Wang Lianjun,Jiang Wan,et al. In-situ fabrication of sic-tic-ti3sic2 composites by spark plasma sintering[J]. Rare metal materials and engineering,2007,36:816-818. |
| APA | Zhang Jianfeng,Wang Lianjun,Jiang Wan,Chen Lidong,&Wu Ting.(2007).In-situ fabrication of sic-tic-ti3sic2 composites by spark plasma sintering.Rare metal materials and engineering,36,816-818. |
| MLA | Zhang Jianfeng,et al."In-situ fabrication of sic-tic-ti3sic2 composites by spark plasma sintering".Rare metal materials and engineering 36(2007):816-818. |
入库方式： iSwitch采集
来源：中国科学院大学
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。