Influence of filler type on the performance and microstructure of a carbon/graphite material
文献类型：期刊论文
| 作者 | Liu Zhan-jun1,2; Guo Quan-gui1; Liu Lang1; Shi Jing-li1; Zhai Geng-tai1 |
| 刊名 | New carbon materials
 |
| 出版日期 | 2010-08-01 |
| 卷号 | 25期号:4页码:313-316 |
| 关键词 | Carbon/graphite Mechanical strength Porosity Microstructure |
| ISSN号 | 1007-8827 |
| DOI | 10.1016/s1872-5805(09)60035-4 |
| 通讯作者 | Liu lang(liulang@public.ty.sx.cn) |
| 英文摘要 | Carbon/graphite material was prepared by subjecting a mixture of coal-tar pitch binder and a relevant filler to uniaxial compression at 150 mpa for 10 min, followed by calcination at 2300 degrees c for i h, and graphitization at 2300 degrees c in an induction furnace. four fillers, carbon black (cb), petroleum-coke powder, needle-coke powder, and natural graphite powder (ng), were used. the effect of filler type on the performance and microstructure of the material was investigated. results reveal that the cb-based material has excellent flexural and compressive strength, with the highest values of 88.0 and 173.2 mpa, respectively, but poor thermal and electrical conductivity. the thermal conductivity of the ng-based material has the highest value of 278 w/m.k, but the flexural and compressive strength are limited to 51.1 and 90.2 mpa, respectively. microstructural analysis showed that the ng-based material has the largest crystallite size, as well as the most perfect orientation of graphite layers. |
| WOS关键词 | SECONDARY BATTERY ; DOPED GRAPHITE ; CARBON ; CONDUCTIVITY |
| WOS研究方向 | Materials Science |
| WOS类目 | Materials Science, Multidisciplinary |
| 语种 | 英语 |
| WOS记录号 | WOS:000281534800013 |
| 出版者 | SCIENCE CHINA PRESS |
| URI标识 | http://www.irgrid.ac.cn/handle/1471x/2408035 |
| 专题 | 中国科学院大学 |
| 通讯作者 | Liu Lang |
| 作者单位 | 1.Chinese Acad Sci, Inst Coal Chem, Key Lab Carbon Mat, Taiyuan 030001, Shanxi, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu Zhan-jun,Guo Quan-gui,Liu Lang,et al. Influence of filler type on the performance and microstructure of a carbon/graphite material[J]. New carbon materials,2010,25(4):313-316. |
| APA | Liu Zhan-jun,Guo Quan-gui,Liu Lang,Shi Jing-li,&Zhai Geng-tai.(2010).Influence of filler type on the performance and microstructure of a carbon/graphite material.New carbon materials,25(4),313-316. |
| MLA | Liu Zhan-jun,et al."Influence of filler type on the performance and microstructure of a carbon/graphite material".New carbon materials 25.4(2010):313-316. |
入库方式： iSwitch采集
来源：中国科学院大学
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。