Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al-Zn-Mg-Cu alloy
文献类型:期刊论文
作者 | Chemingui, Mahmoud1; Benkhenafou, Fethi2; Khitouni, Mohamed1; Jozwiak, Karol3; Mesmacque, Gerard4; Shi, MingQuan5; Douadji, Lyes5 |
刊名 | INTERNATIONAL JOURNAL OF MATERIALS RESEARCH |
出版日期 | 2018-12-01 |
卷号 | 109期号:12页码:1113-1121 |
ISSN号 | 1862-5282 |
关键词 | Al-Zn-Mg-Cu alloy Heat treatment Precipitation hardening Microstructure Plastic properties |
DOI | 10.3139/146.111709 |
通讯作者 | Douadji, Lyes(ldouadji@yahoo.fr) |
英文摘要 | The effect of the heat treatment on the microsturucture and the mechanical response of a commercial Al-Zn-Mg-Cu alloy (AA7075) was studied. The influence of annealing on the hardening and plastic properties of Al-Zn-Mg-Cu alloy was investigated by indentation and tensile tests. The microstructural evolution of the alloy was examined by meant of optical, scanning and transmission electron microscopies. After various ageing states, the Al-Zn-Mg-Cu alloy showed significant changes in microstructure and mechanical behaviour. After quenching, the microstructure was characterized by high ductility. Following ageing at 140 degrees C, corresponding to the maximum hardness value, the alloy reveals a high volume fraction of small eta' precipitates. The minimum hardening is recorded after ageing at 350 degrees C. The radical change in the microstructure of the alloy influences its mechanical behaviour, especially in hardening and plasticity. |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | CARL HANSER VERLAG |
WOS记录号 | WOS:000452550100004 |
源URL | [http://119.78.100.138/handle/2HOD01W0/7169] |
专题 | 中国科学院重庆绿色智能技术研究院 |
通讯作者 | Douadji, Lyes |
作者单位 | 1.Fac Sci, Lab Inorgan Chem, Sfax, Tunisia 2.Univ Tlemcen, Fac Sci, Dept Phys, Tilimsen, Algeria 3.Warsaw Inst Aviat, Al Krakowska, Warsaw, Poland 4.Lab Mecan Lille, Cite Sci Villeneuve dAscq, Lille, France 5.Chinese Acad Sci, Chongqing Inst Green & Intelligent Technol, Shuitu Town, Beibei Chongqin, Peoples R China |
推荐引用方式 GB/T 7714 | Chemingui, Mahmoud,Benkhenafou, Fethi,Khitouni, Mohamed,et al. Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al-Zn-Mg-Cu alloy[J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH,2018,109(12):1113-1121. |
APA | Chemingui, Mahmoud.,Benkhenafou, Fethi.,Khitouni, Mohamed.,Jozwiak, Karol.,Mesmacque, Gerard.,...&Douadji, Lyes.(2018).Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al-Zn-Mg-Cu alloy.INTERNATIONAL JOURNAL OF MATERIALS RESEARCH,109(12),1113-1121. |
MLA | Chemingui, Mahmoud,et al."Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al-Zn-Mg-Cu alloy".INTERNATIONAL JOURNAL OF MATERIALS RESEARCH 109.12(2018):1113-1121. |
入库方式: OAI收割
来源:重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。