中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Mechanical properties of 3D parts fabricated by fused deposition modeling: Effect of various fillers in polylactide

文献类型:期刊论文

作者Gao, Xia1; Zhang, Daijun1,2; Qi, Shunxin2,3; Wen, Xiangning2,3; Su, Yunlan2,3
刊名JOURNAL OF APPLIED POLYMER SCIENCE
出版日期2019-08-15
卷号136期号:31页码:10
ISSN号0021-8995
关键词fused deposition modeling interlayer bond strength mechanical properties polylactide surface quality
DOI10.1002/app.47824
通讯作者Gao, Xia(gaoxia@cigit.ac.cn) ; Su, Yunlan(ylsu@iccas.ac.cn)
英文摘要Weak mechanical strength and serious mechanical anisotropy are two key limiting factors for three-dimensional (3D) parts prepared by fused deposition modeling (FDM) in industrial applications. In this work, we investigated the relationships between mechanical properties and surface quality of FDM parts with the properties of materials used. Three kinds of polylactide (PLA) filaments, composed of the same PLA matrix but different fillers (carbon fibers and talc), were used to prepare FDM specimens. Due to the nature of FDM process, FDM parts exhibited tensile properties weaker and more anisotropic than their injection-molding counterparts. The presence of fillers affected the tensile properties of FDM parts, especially the degree of mechanical anisotropy. It is found that the interlayer bond governing the mechanical performance of FDM parts was improved since the fillers added in the polymer materials facilitates the molecular diffusion across the bond interface. Also, the surface quality of FDM parts varied with fillers. Neat PLA parts exhibited surface quality superior to the 3D parts printed with composites filaments. This work is believed to provide highlights on the development of polymer composites filament and improvement of mechanical properties of FDM parts. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47824.
资助项目National Natural Science Foundation of China[51603205] ; National Key Research and Development Program of China[2016YFB1100800] ; Talent Cultivation and Recruitment Plan of the Light of West China Program of Chinese Academy of Sciences
WOS研究方向Polymer Science
语种英语
出版者WILEY
WOS记录号WOS:000468488300014
源URL[http://119.78.100.138/handle/2HOD01W0/7922]  
专题机器人与3D打印技术创新中心
通讯作者Gao, Xia; Su, Yunlan
作者单位1.Chinese Acad Sci, Chongqing Engn Res Ctr Applicat Technol 3D Printi, Chongqing Inst Green & Intelligent Technol, Chongqing 400714, Peoples R China
2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China
3.Chinese Acad Sci, Beijing Natl Lab Mol Sci, CAS Res Educ Ctr Excellence Mol Sci, Inst Chem, Beijing 100190, Peoples R China
推荐引用方式
GB/T 7714
Gao, Xia,Zhang, Daijun,Qi, Shunxin,et al. Mechanical properties of 3D parts fabricated by fused deposition modeling: Effect of various fillers in polylactide[J]. JOURNAL OF APPLIED POLYMER SCIENCE,2019,136(31):10.
APA Gao, Xia,Zhang, Daijun,Qi, Shunxin,Wen, Xiangning,&Su, Yunlan.(2019).Mechanical properties of 3D parts fabricated by fused deposition modeling: Effect of various fillers in polylactide.JOURNAL OF APPLIED POLYMER SCIENCE,136(31),10.
MLA Gao, Xia,et al."Mechanical properties of 3D parts fabricated by fused deposition modeling: Effect of various fillers in polylactide".JOURNAL OF APPLIED POLYMER SCIENCE 136.31(2019):10.

入库方式: OAI收割

来源:重庆绿色智能技术研究院

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。