Direct Writing of Silver Micro-Nanostructures by Femtosecond Laser Tweezer
文献类型:期刊论文
作者 | Chen, Zhongyun1,2; Fang, Gan2![]() ![]() ![]() |
刊名 | Zhongguo Jiguang/Chinese Journal of Lasers
![]() |
出版日期 | 2018 |
卷号 | 45期号:4 |
ISSN号 | 02587025 |
DOI | 10.3788/CJL201845.0402006 |
英文摘要 | A 800 nm femtosecond laser tweezer can be used to capture the silver nanoparticles dispersed in water and the silver wires are directly written on the glass substrate. The influences of laser power on the silver wire width and surface morphology are investigated by adjusting laser parameters. The direct writing of silver wires with a width of 378 nm is realized. After tests, the electrical resistivity of the fabricated silver wire is 19.88 times that of bulk silver. In addition, a two-dimensional (2D) silver grid structure is fabricated by this technique, which manifests that this technique possesses a good process ability in the field of 2D structure direct writing. © 2018, Chinese Lasers Press. All right reserved. |
语种 | 中文 |
源URL | [http://119.78.100.138/handle/2HOD01W0/8016] ![]() |
专题 | 机器人与3D打印技术创新中心 |
作者单位 | 1.College of Opto-Electronic Engineering, Changchun University of Science and Technology, Changchun; Jilin; 130022, China; 2.Chongqing Key Laboratory of Additive Manufacturing Technology and Systems, Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing; 400714, China |
推荐引用方式 GB/T 7714 | Chen, Zhongyun,Fang, Gan,Cao, Liangcheng,et al. Direct Writing of Silver Micro-Nanostructures by Femtosecond Laser Tweezer[J]. Zhongguo Jiguang/Chinese Journal of Lasers,2018,45(4). |
APA | Chen, Zhongyun.,Fang, Gan.,Cao, Liangcheng.,Fu, Yun.,Cao, Hongzhong.,...&Duan, Xuanming.(2018).Direct Writing of Silver Micro-Nanostructures by Femtosecond Laser Tweezer.Zhongguo Jiguang/Chinese Journal of Lasers,45(4). |
MLA | Chen, Zhongyun,et al."Direct Writing of Silver Micro-Nanostructures by Femtosecond Laser Tweezer".Zhongguo Jiguang/Chinese Journal of Lasers 45.4(2018). |
入库方式: OAI收割
来源:重庆绿色智能技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。